prikaz prve stranice dokumenta Optimiranje razgradnje prirodnih organskih tvari postupcima temeljenim na primjeni UV zračenja
  Download
PDF 2.48 MB
master's thesis
Optimiranje razgradnje prirodnih organskih tvari postupcima temeljenim na primjeni UV zračenja
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. urn:nbn:hr:235:386240
Barta, Marija
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Barta, M. (2016). Optimiranje razgradnje prirodnih organskih tvari postupcima temeljenim na primjeni UV zračenja (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:386240

Barta, Marija. "Optimiranje razgradnje prirodnih organskih tvari postupcima temeljenim na primjeni UV zračenja." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:386240

Barta, Marija. "Optimiranje razgradnje prirodnih organskih tvari postupcima temeljenim na primjeni UV zračenja." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2016. https://urn.nsk.hr/urn:nbn:hr:235:386240

Barta, M. (2016). 'Optimiranje razgradnje prirodnih organskih tvari postupcima temeljenim na primjeni UV zračenja', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 10 June 2024, https://urn.nsk.hr/urn:nbn:hr:235:386240

Barta M. Optimiranje razgradnje prirodnih organskih tvari postupcima temeljenim na primjeni UV zračenja [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2016 [cited 2024 June 10] Available at: https://urn.nsk.hr/urn:nbn:hr:235:386240

M. Barta, "Optimiranje razgradnje prirodnih organskih tvari postupcima temeljenim na primjeni UV zračenja", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:235:386240

Metadata
TitleOptimiranje razgradnje prirodnih organskih tvari postupcima temeljenim na primjeni UV zračenja
Title (english)Optimization of natural organic matter degradation by UV-based processes
AuthorMarija Barta
MentorHrvoje Juretić (mentor)
MentorHrvoje Cajner (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2016-12-09, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovim radom istraživana je optimizacija razgradnje prirodnih organskih tvari postupkom UV/ H2O2 pomoću faktorskog plana pokusa i metode odzivne površine. Istraživanje se provodilo na modelnoj vodi te se pratio utjecaj promjene sadržaja otopljenog organskog ugljika i doze vodikovog peroksida na stupanj uklanjanja otopljenog organskog ugljika pri konstantnoj pH vrijednost. Faktorskim planom pokusa ispitan je plan glavnog pokusa, a metodom odzivne površine su se prikazali rezultati procesa. Za analizu rezultata koristio se programski paket Design Expert 7. Dobivenom regresijskom funkcijom modela prikazani su rezultati maksimalnog uklanjanja otopljenog organskog ugljika. Prema rezultatima, pri sadržaju otopljenog organskog ugljika od oko 8 mg/L te uz primjenu doze H2O2 od približno 250 mg/L postignuta je maksimalna razgradnja od oko 34%.
Abstract (english)
The purpose of this study was to investigate the optimization of natural organic matter degradation by UV/H2O2 process using a factorial design of experiment and a response surface method. The research was performed on model water and the influence of variable concentration of dissolved organic carbon and hydrogen peroxide dosage on the removal degree of dissolved organic carbon at a constant pH was investigated The process was optimized by design of experiment and response surface methodology. Design Expert Software version 7 was used for developing and evaluating the experimental design. According to the results, with a dissolved organic carbon concentration of around 8 mg/L and hydrogen peroxide dosage less than 250 mg/L, the maximum degradation of about 34 % was achieved.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:386240
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-27 13:07:08