prikaz prve stranice dokumenta Primjena polimernih kompozita u izradi dijela HALE letjelice
  Download
PDF 3.57 MB
undergraduate thesis
Primjena polimernih kompozita u izradi dijela HALE letjelice
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. urn:nbn:hr:235:454853
Matošević, Tamara
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Matošević, T. (2017). Primjena polimernih kompozita u izradi dijela HALE letjelice (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:454853

Matošević, Tamara. "Primjena polimernih kompozita u izradi dijela HALE letjelice." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:454853

Matošević, Tamara. "Primjena polimernih kompozita u izradi dijela HALE letjelice." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2017. https://urn.nsk.hr/urn:nbn:hr:235:454853

Matošević, T. (2017). 'Primjena polimernih kompozita u izradi dijela HALE letjelice', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 03 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:454853

Matošević T. Primjena polimernih kompozita u izradi dijela HALE letjelice [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2017 [cited 2024 December 03] Available at: https://urn.nsk.hr/urn:nbn:hr:235:454853

T. Matošević, "Primjena polimernih kompozita u izradi dijela HALE letjelice", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:235:454853

Metadata
TitlePrimjena polimernih kompozita u izradi dijela HALE letjelice
Title (english)Application of PMC in Manufacturing of HALE Plane Part
AuthorTamara Matošević
MentorZdravko Schauperl (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2017-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Aviation, Rocket and Space Technology
Abstract
U ovom radu analizirana je konstrukcija HALE (High Altitude Long Endurance) bespilotnih letjelica te materijali koji se koriste za njihovu izradu. Uvodni dio opisuje prošlost bespilotnih letjelica te kada je počela upotreba HALE letjelica. Dalje su opisani polimerni kompoziti s vlaknima, čija je uloga značajna kod izrade krila HALE letjelica te njihova svojstva. U eksperimentalnom dijelu rada izrađeni su polimerni kompoziti kojima su ispitana mehanička svojstva. Na temelju ispitanih mehaničkih svojstava donesen je zaključak.
Abstract (english)
In this study, the structure of HALE (Long Altitude Long Endurance) unmanned aerial vehicles and materials used for their construction was analyzed. Introduction part describes the history of unmanned aerial vehicles and the time when use of HALE aircraft began. Further, fiber-reinforced polymers and their properties are described, whose role is significant in the design of the HALE wing structure. In the experimental part, polymeric composites with fibres were made and tested for mechanical properties. Based on the examined mechanical properties, a conclusion was made.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:454853
Study programmeTitle: Aeronautical Studies
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka zrakoplovnog inženjerstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka zrakoplovnog inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-05-28 09:38:47