prikaz prve stranice dokumenta Proračun opterećenja disekcije torakalne aorte
  Download
PDF 2.63 MB
master's thesis
Proračun opterećenja disekcije torakalne aorte
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. urn:nbn:hr:235:161292
Pešorda, Filip
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Pešorda, F. (2019). Proračun opterećenja disekcije torakalne aorte (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:161292

Pešorda, Filip. "Proračun opterećenja disekcije torakalne aorte." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:161292

Pešorda, Filip. "Proračun opterećenja disekcije torakalne aorte." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:161292

Pešorda, F. (2019). 'Proračun opterećenja disekcije torakalne aorte', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:161292

Pešorda F. Proračun opterećenja disekcije torakalne aorte [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2019 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:235:161292

F. Pešorda, "Proračun opterećenja disekcije torakalne aorte", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:235:161292

Metadata
TitleProračun opterećenja disekcije torakalne aorte
Title (english)Numerical analysis of dissection in thoracic aorta
AuthorFilip Pešorda
MentorIgor Karšaj (mentor)
Committee memberZvonko Herold (predsjednik povjerenstva)
Committee memberTanja Jurčević-Lulić (član povjerenstva)
Committee memberDarko Ivančević (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2019-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu su opisana temeljna znanja iz područja medicine i mehanike kontinuuma potrebna za razumijevanje napravljenog u sklopu ovog rada. Za numeričku analizu korišten je i opisan programski paket za metodu konačnih elemenata Abaqus. Kreiran je model zdrave aorte. Za zdravu aortu provedena je simulacija u kojoj se stijenka krvne žile smatra apsolutno krutom i u kojoj se stijenka smatra deformabilnom. Rješenja dobivena u simulaciji s krutom stijenkom uspoređena su s onim dobivenim za deformabilnu stijenku. Potom je izrađen model disekcije aorte te je definiran i opisan referentni slučaj. Rezultati dobiveni za referentni slučaj poslužili su pri definiranju ostala četiri slučaja za koje su provedene simulacije. Za sve slučajeve prikazani su rezultati za posmična naprezanja po duljini stijenke aorte. Na osnovu dobivenih rezultata izvedeni su zaključci. Utvrđeno je da se povećanjem ulazne brzine u lažni lumen posmična naprezanja po duljini vanjskog dijela stijenke pravog lumena povećavaju, dok se za unutarnji dio stijenke smanjuju.
Abstract (english)
Basic theory in the areas of medicine and continuum mechanics needed for the understanding of this paper is explained in the beggining of the paper. Abaqus, finite element analysis software, that was used for numerical analysis is explained in this paper aswell. Model of a healthy aorta was created. This model was used for a simulation in which wall of the aorta is considered to be absolutely rigid and a simulation in which wall of the aorta is considered to be deformable. Results of this simulations were compared to each other. Furthermore, model of the dissection of aorta was created and reference case was defined aswell as described. Results of the reference case were used in defining other four cases for which the simulations were preformed. Results of wallshear along the length of aorta wall were shown for all cases. Conclusions were made on the basis of results. It was determineted that with the increase of entry speed in false lumen, wallshear along the length of the outer part of the real lumen is increased, while it is decreased along the inner part of the wall.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:161292
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-07-15 22:25:51