prikaz prve stranice dokumenta Utjecaj udjela ugljičnih vlakana na mehanička svojstva kompozita s plastomernom matricom
  Download
PDF 1.44 MB
undergraduate thesis
Utjecaj udjela ugljičnih vlakana na mehanička svojstva kompozita s plastomernom matricom
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. urn:nbn:hr:235:249224
Kajinić, Maja
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Kajinić, M. (2019). Utjecaj udjela ugljičnih vlakana na mehanička svojstva kompozita s plastomernom matricom (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:249224

Kajinić, Maja. "Utjecaj udjela ugljičnih vlakana na mehanička svojstva kompozita s plastomernom matricom." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:249224

Kajinić, Maja. "Utjecaj udjela ugljičnih vlakana na mehanička svojstva kompozita s plastomernom matricom." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:249224

Kajinić, M. (2019). 'Utjecaj udjela ugljičnih vlakana na mehanička svojstva kompozita s plastomernom matricom', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 27 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:249224

Kajinić M. Utjecaj udjela ugljičnih vlakana na mehanička svojstva kompozita s plastomernom matricom [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2019 [cited 2024 December 27] Available at: https://urn.nsk.hr/urn:nbn:hr:235:249224

M. Kajinić, "Utjecaj udjela ugljičnih vlakana na mehanička svojstva kompozita s plastomernom matricom", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:235:249224

Metadata
TitleUtjecaj udjela ugljičnih vlakana na mehanička svojstva kompozita s plastomernom matricom
Title (english)The effect of fiber content on mechanical properties of carbon fiber reinforced thermoplastic composites
AuthorMaja Kajinić
MentorTatjana Haramina (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2019-09-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu su ispitana mehanička svojstva kompozita s plastomernom matricom od kopolimera etilena i metil metakrilatne kiseline ojačanog ugljičnim vlaknima. Izrađene su dvije kompozitne ploče, svaka s dva sloja jednoosno orijentiranih vlakana pri jednakim uvjetima proizvodnje. Ispitna tijela izrezana su paralelno, te su ispitana svojstva prividne smične međuslojne čvrstoće, savojnog modula elastičnosti i savojne čvrstoće. Dobivene vrijednosti ukazuju na ponovljivost kvalitete izrade ploče. Svojstva ploče s dva sloja vlakana uspoređena su sa svojstvima ploče sa samo jednim slojem. Savojni modul je porastao za red veličine, a prividna smična međuslojna čvrstoća za 14,6 %. Zbog vrlo male krutosti ploče s jednim slojem vlakana, nije bilo moguće odrediti čvrstoću pri savojnom opterećenju.
Abstract (english)
The mechanical properties of a composite with a thermoplastic matrix made of copolymers of ethylene and methyl methacrylic acid reinforced with carbon fibers were investigated. Two composite sheets were made, each of them was reinforced with two layers of uniaxially oriented fibers under the same manufacturing conditions. The values obtained indicate the reproducibility of the sheet quality. The properties of the sheet reinforced with the two layers were compared with those uniaxially reinforced with a single layer. The flexural modulus increased by an order of magnitude and the apparent shear interlayer strength by 14,6 %. Due to the very low stiffness of the single-layer sheet, it was not possible to determine its flexural strength Key words: thermoplastic based composites, uniaxial reinforcement, apparent interlaminar strength, flexural modulus, flexural strength.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:249224
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-09-22 22:48:48