prikaz prve stranice dokumenta Istraživanje mogućnosti unapređenja proizvodnog programa opreme za obradu otpada
  Download
PDF 2.74 MB
undergraduate thesis
Istraživanje mogućnosti unapređenja proizvodnog programa opreme za obradu otpada
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. urn:nbn:hr:235:315559
Stojkov, Karlo
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Stojkov, K. (2019). Istraživanje mogućnosti unapređenja proizvodnog programa opreme za obradu otpada (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:315559

Stojkov, Karlo. "Istraživanje mogućnosti unapređenja proizvodnog programa opreme za obradu otpada." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:315559

Stojkov, Karlo. "Istraživanje mogućnosti unapređenja proizvodnog programa opreme za obradu otpada." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:315559

Stojkov, K. (2019). 'Istraživanje mogućnosti unapređenja proizvodnog programa opreme za obradu otpada', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 25 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:315559

Stojkov K. Istraživanje mogućnosti unapređenja proizvodnog programa opreme za obradu otpada [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2019 [cited 2024 November 25] Available at: https://urn.nsk.hr/urn:nbn:hr:235:315559

K. Stojkov, "Istraživanje mogućnosti unapređenja proizvodnog programa opreme za obradu otpada", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:235:315559

Metadata
TitleIstraživanje mogućnosti unapređenja proizvodnog programa opreme za obradu otpada
Title (english)Research on the possibilities of improving the produczion programme of waste processing equipment
AuthorKarlo Stojkov
MentorZoran Kunica (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2019-09-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu navedeni su suvremeni problemi vezani uz stvaranje, gomilanje, razvrstavanje te recikliranje otpada. Bilo da se on gomila, razlaže u podzemnim vodama ili spaljivanjem širi atmosferom, otpad ozbiljno ugrožava okoliš i zdravlje ljudi. U radu je za pojedine vrste otpada dan pregled načina gospodarenja i mehaničko-biološke i termičke obrade. Opisani su odvajanje i sortiranje otpada sa stajališta automatizacije i robotizacije. Prikazane su tehnike za razdvajanje različitih vrsta otpada, uz prikaz uređaja koji obavljaju radnje sortiranja pomoću različitih vrsta senzora. Osmišljen je i detaljno specificiran automatizirani sustav za sortiranje, odvajanje, usitnjavanje te odvoz otpada, sastavljen od više linija, te izračunata njegova isplativost. Također, posebno je razrađen uređaj za sortiranje magnetičnih i nemagnetičnih metala.
Abstract (english)
This this thesis are listed the contemporary problems associated with the creation, accumulation, sorting and recycling. Whether it is piling up, decomposing in groundwater or being burnt by the atmosphere, waste is a serious threat to the environment and human health. This thesis gives an overview of waste management and mechanical-biological and thermal treatment for individual types of waste. Separation and sorting of waste from the standpoint of automation and robotization are described. Techniques for separating different types of waste are presented, along with devices that perform sorting operations using different types of sensors. An automated system for sorting, separating, shredding and waste removal was designed and specified, made up of several lines, and its cost-effectiveness was calculated. Also, a special device for sorting magnetic and non-magnetic metals has been developed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:315559
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-09-23 17:49:10