prikaz prve stranice dokumenta Mikrolaka ovjesna jedrilica s motorom
  Download
PDF 2.69 MB
master's thesis
Mikrolaka ovjesna jedrilica s motorom
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. urn:nbn:hr:235:689986
Guina, Vedran
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Guina, V. (2019). Mikrolaka ovjesna jedrilica s motorom (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:689986

Guina, Vedran. "Mikrolaka ovjesna jedrilica s motorom." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:689986

Guina, Vedran. "Mikrolaka ovjesna jedrilica s motorom." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:689986

Guina, V. (2019). 'Mikrolaka ovjesna jedrilica s motorom', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 28 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:689986

Guina V. Mikrolaka ovjesna jedrilica s motorom [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2019 [cited 2024 December 28] Available at: https://urn.nsk.hr/urn:nbn:hr:235:689986

V. Guina, "Mikrolaka ovjesna jedrilica s motorom", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:235:689986

Metadata
TitleMikrolaka ovjesna jedrilica s motorom
Title (english)Microlight trike
AuthorVedran Guina
MentorIgor Karšaj (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2019-12-05, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema diplomskog rada je dizajn i razrada mikrolake ovjesne jedrilice s motorom i numerička analiza te konstrukcije. Povijest zmajarstva, izgled konstrukcije motornih ovjesnih jedrilica te tehnike upravljanja i leta jedrilica opisani su u uvodu rada. Nakon uvida u stanje tržišta i analizom postojećih proizvoda, definirane su karakteristike koje mikrolake ovjesne jedrilice moraju imati te su prikazana i analizirana rješenja za pojedine konstrukcijske zahtjeve. Na temelju toga osmišljen je koncept mikrolake ovjesne jedrilice koji je modeliran korištenjem programskog paketa SolidWorks. Koncept je u nastavku rada detaljno prikazan te je opisan način sklapanja i rastavljanja konstrukcije. Nabrojane su važnosti pravilnog dimenzioniranja cijevi konstrukcije i prikazan je položaj pilota tijekom leta motornom ovjesnom jedrilicom koristeći programski paket Catia V5. U nastavku rada, korištenjem programskog paketa Abaqus, provedena je numerička analiza konstrukcije osmišljenog koncepta. Prvo su provjerena naprezanja tijekom leta za više slučajeva opterećenja. Nakon toga analizirana je čvrstoća konstrukcije prilikom slijetanja kada dolazi do udarnog opterećenja. Na temelju numeričke analize zaključeno je da su pojedine cijevi predimenzionirane te je nakon promjene promjera i debljina stijenki tih cijevi provedena još jedna analiza naprezanja konstrukcije. U završnom poglavlju dan je zaključak na temelju provedenih numeričkih analiza konstrukcije.
Abstract (english)
The theme of this master thesis is design and development of powered microlight hang glider and numerical analysis of its construction. The history of hang gliding, design of hang gliders and the techniques for flying are described in the introduction. After market research and analysis of existing products, the characteristics of microlight hang gliders are defined and solutions for particular design requirements are presented and analyzed. Based on this, the concept of a microlight hang glider was designed and modeled using SolidWorks. The concept is presented in detail and structure assembly as well as disassembly are described. The importance of the correct dimensioning of the structure pipes is described and the position of the pilot during the flight is shown using Catia V5. In the following, a numerical analysis of the construction was carried out using Abaqus. First, the stresses of the structure during flight were checked for multiple loading cases. Afterwards, the strength of the structure during landing when impact load occurs is analyzed. On the basis of the numerical analysis of the structural stress, it was concluded that individual pipes were over-dimensioned and, after changing the diameter and wall thickness of these pipes, another structural stress analysis was performed. The final chapter provides a conclusion based on the numerical analysis of the structure.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:689986
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-11-28 13:00:49