prikaz prve stranice dokumenta Indirektni nadzor procesa bušenja polimernog kompozita primjenom signala akustične emisije
  Download
PDF 3.98 MB
master's thesis
Indirektni nadzor procesa bušenja polimernog kompozita primjenom signala akustične emisije
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. urn:nbn:hr:235:577589
Lučić Pech, Domagoj
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Lučić Pech, D. (2020). Indirektni nadzor procesa bušenja polimernog kompozita primjenom signala akustične emisije (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:577589

Lučić Pech, Domagoj. "Indirektni nadzor procesa bušenja polimernog kompozita primjenom signala akustične emisije." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:577589

Lučić Pech, Domagoj. "Indirektni nadzor procesa bušenja polimernog kompozita primjenom signala akustične emisije." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:577589

Lučić Pech, D. (2020). 'Indirektni nadzor procesa bušenja polimernog kompozita primjenom signala akustične emisije', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 07 September 2024, https://urn.nsk.hr/urn:nbn:hr:235:577589

Lučić Pech D. Indirektni nadzor procesa bušenja polimernog kompozita primjenom signala akustične emisije [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2020 [cited 2024 September 07] Available at: https://urn.nsk.hr/urn:nbn:hr:235:577589

D. Lučić Pech, "Indirektni nadzor procesa bušenja polimernog kompozita primjenom signala akustične emisije", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:235:577589

Metadata
TitleIndirektni nadzor procesa bušenja polimernog kompozita primjenom signala akustične emisije
Title (english)Indirect process monitoring during polymer composite drilling using acoustic emission signals
AuthorDomagoj Lučić Pech
MentorDanko Brezak (mentor)
Committee memberDanko Brezak (predsjednik povjerenstva)
Committee memberIvica Garašić (član povjerenstva)
Committee memberGorana Baršić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2020-01-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Kompoziti su relativno nova vrsta materijala često korištena zbog mogućnosti postizanja iznimnih kombinacija fizikalno-kemijskih svojstava. Kompozitni proizvodi često se obrađuju/izrađuju tehnologijom obrade odvajanjem čestica. Pritom je bušenje jedna od najzastupljenijih metoda obrade. Prilikom izrade provrta kod određenih tipova kompozita dolazi do raslojavanja (delaminacije) slojeva u kompozitu što nepovoljno utječe na mehanička i druga svojstva kompozita. U sklopu ovog diplomskog rada analizirana je primjena signala akustične emisije u nadzoru procesa bušenja polimernog kompozita ojačanog staklenim vlaknima. Značajke izdvojene iz navedenih vrsta signala korištene su u klasifikaciji stupnja istrošenosti reznog alata i stupnja delaminacije materijala. Za klasifikator je korištena neuronska mreža s radijalnim baznim funkcijama.
Abstract (english)
Composites are a relatively new type of products often used due to the possibility of achieving remarkable combinations of physico-chemical properties. Composite products are often fabricated by machining technologies. Drilling is one of the most common processing methods. While drilling holes in certain types of composites, layers (delamination) of layers in the composite occurs, which adversely affects the mechanical and other properties of the composite. As part of this thesis, the application of acoustic emission signals in the control of the drilling process of a glass fiber reinforced polymer composite is analyzed. The features extracted from the indicated signal types were used in the classification of the degree of wear of the cutting tool and the degree of delamination of the material. A neural network with radial basis functions was used for the classifier.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:577589
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Embargo expiration date: 2020-06-15
Terms of useLicence In copyright icon
Created on2020-01-15 21:16:50