prikaz prve stranice dokumenta Pregled ISO normi za izradu uređaja za trošenje implantata kuka
  Download
PDF 1.18 MB
undergraduate thesis
Pregled ISO normi za izradu uređaja za trošenje implantata kuka
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. urn:nbn:hr:235:907745
Radić, Karla
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Radić, K. (2020). Pregled ISO normi za izradu uređaja za trošenje implantata kuka (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:907745

Radić, Karla. "Pregled ISO normi za izradu uređaja za trošenje implantata kuka." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:907745

Radić, Karla. "Pregled ISO normi za izradu uređaja za trošenje implantata kuka." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:907745

Radić, K. (2020). 'Pregled ISO normi za izradu uređaja za trošenje implantata kuka', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 03 June 2024, https://urn.nsk.hr/urn:nbn:hr:235:907745

Radić K. Pregled ISO normi za izradu uređaja za trošenje implantata kuka [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2020 [cited 2024 June 03] Available at: https://urn.nsk.hr/urn:nbn:hr:235:907745

K. Radić, "Pregled ISO normi za izradu uređaja za trošenje implantata kuka", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:235:907745

Metadata
TitlePregled ISO normi za izradu uređaja za trošenje implantata kuka
Title (english)Review of ISO standards for wear testing machines for hip implant wear
AuthorKarla Radić
MentorSuzana Jakovljević (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2020, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Zamjena zgloba kuka sastoji se od zamjene zgloba implantatom koji je sposoban proizvesti istu funkcionalnost. Kako bi implementacija bila uspješna važno je ujediniti biokompatibilnost i slabo trošenje materijala. Osobitu pozornost pridodana je tribološkom ponašanju biomaterijala. Analizirane su ISO norme koje ispituju trošenja materijala. Najvažnija je BS ISO 14242 koja se sastoji od četiri dijela i opisuje trošenje proteze zgloba kuka. Nakon više od 50 godina evolucije, što se tiče konstrukcije i materijala, postotak trošenja većine implantata je vrlo nizak, što smanjuje rizik vezan uz otpuštanje čestica trošenja u tijelu.
Abstract (english)
Replacement surgery of hip joint consists of the substitution of the joint with an implant able to recreate the articulation functionality. To have a successful implementation it is important to unit biocompatible and low wear rate materials. Particular attention has been given to the tribological behavior of the biomaterials. ISO norms which deal with material wear were analyzed. The most important one is ISO 14242 which is composed of four parts and describes the wear of total hip-joint prostheses. After more than 50 years of evolution, in term of designs and materials, the actual wear rate of the most common implants is low, allowing us to sensibly reduce the risk related to the widespread debris distribution in the human body.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:907745
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-02-21 07:42:37