prikaz prve stranice dokumenta Utjecaj dodatka cirkonijevog oksida na intenzitet abrazijskog trošenja aluminij-oksidne keramike
  Download
PDF 3 MB
undergraduate thesis
Utjecaj dodatka cirkonijevog oksida na intenzitet abrazijskog trošenja aluminij-oksidne keramike
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. urn:nbn:hr:235:522353
Cesarec, Paula
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Cesarec, P. (2020). Utjecaj dodatka cirkonijevog oksida na intenzitet abrazijskog trošenja aluminij-oksidne keramike (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:522353

Cesarec, Paula. "Utjecaj dodatka cirkonijevog oksida na intenzitet abrazijskog trošenja aluminij-oksidne keramike." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:522353

Cesarec, Paula. "Utjecaj dodatka cirkonijevog oksida na intenzitet abrazijskog trošenja aluminij-oksidne keramike." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:522353

Cesarec, P. (2020). 'Utjecaj dodatka cirkonijevog oksida na intenzitet abrazijskog trošenja aluminij-oksidne keramike', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:522353

Cesarec P. Utjecaj dodatka cirkonijevog oksida na intenzitet abrazijskog trošenja aluminij-oksidne keramike [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2020 [cited 2024 December 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:522353

P. Cesarec, "Utjecaj dodatka cirkonijevog oksida na intenzitet abrazijskog trošenja aluminij-oksidne keramike", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:235:522353

Metadata
TitleUtjecaj dodatka cirkonijevog oksida na intenzitet abrazijskog trošenja aluminij-oksidne keramike
Title (english)Influence of zirconium oxide addition on the abrasion wear rate of alumina ceramics
AuthorPaula Cesarec
MentorVera Rede (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2020-02-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovoga rada bio je odrediti kako dodatak cirkonijevog oksida utječe na intenzitet abrazijskoga trošenja aluminij-oksidne keramike. Uspoređene su vrijednosti intenziteta abrazijskoga trošenja za monolitnu aluminij-oksidnu keramiku te kompozitnu aluminij-oksidnu keramiku s dodatkom od 1 i 10 % cirkonijevog oksida. U teorijskom dijelu rada opisana je tehnička keramika s posebnim osvrtom na monolitnu i kompozitnu aluminij-oksidnu keramiku. Također je opisan abrazijski mehanizam trošenja, fenomen kritične veličine abrazivnoga zrna i istaknute su neke specifičnosti abrazijskoga trošenja keramike. Provedena ispitivanja pokazala su da dodatak cirkonijevog oksida utječe na otpornost na abrazijsko trošenje aluminij-oksidne keramike, pri čemu je veličina abrazivnih čestica značajan čimbenik. Najveća otpornost na abrazijsko trošenje izmjerena je kod kompozitne keramike s 1 % cirkonijevog oksida, a najmanja kod monolitne aluminij-oksidne keramike. S porastom abrazivnoga zrna intenzitet trošenja kod uzorka s 1 % cirkonijevog oksida kontinuirano raste, a kod uzorka s 10 % cirkonijevog oksida intenzitet trošenja raste eksponencijalno. Fenomen kritične veličine abrazivnoga zrna uočen je samo kod uzorka bez cirkonijevog oksida.
Abstract (english)
The purpose of this paper was to determine how the addition of zirconium oxide affects the abrasion wear rate of alumina ceramics. The values of the abrasion wear rate for monolithic and composite alumina ceramics with the addition of 1-10% of zirconium oxide were compared. In the theoretical part of this paper, the technical ceramics were described, with a special review of monolithic alumina and composite alumina-zirconium ceramics. Also, the abrasion wear mechanism was described, along with the critical grain size effect. Some specifics of abrasion wear of ceramics were also pointed out. The results showed that the addition of zirconium oxide affects the abrasion wear rate of alumina ceramics, where the grain size is also an important factor. The biggest resistance to abrasion wear was measured on composite ceramics with 1% zirconium oxide and the lowest values were detected on monolithic alumina ceramics. By increasing the grain size, the wear intensity of the sample with 1% zirconium oxide grows continuously, while the wear intensity of the sample with 10% zirconium oxide grows exponentially. The grain size effect is detected only on the sample without zirconium oxide.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:522353
ProjectNumber: IP-2016-06-6000
Title: Napredna monolitna i kompozitna keramika za zaštitu od trošenja i korozije
Acronym: WECOR
Leader: Lidija Ćurković
Jurisdiction: Croatia
Funder: HRZZ
Funding stream: IP
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-02-21 10:44:44