prikaz prve stranice dokumenta Sinteriranje lijevane aluminijeve oksidne keramike uz uporabu dijela otpadnog aluminijevog oksidnog praha
  Download
PDF 3.1 MB
undergraduate thesis
Sinteriranje lijevane aluminijeve oksidne keramike uz uporabu dijela otpadnog aluminijevog oksidnog praha
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. urn:nbn:hr:235:075562
Žalac, Miroslav
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Žalac, M. (2020). Sinteriranje lijevane aluminijeve oksidne keramike uz uporabu dijela otpadnog aluminijevog oksidnog praha (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:075562

Žalac, Miroslav. "Sinteriranje lijevane aluminijeve oksidne keramike uz uporabu dijela otpadnog aluminijevog oksidnog praha." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:075562

Žalac, Miroslav. "Sinteriranje lijevane aluminijeve oksidne keramike uz uporabu dijela otpadnog aluminijevog oksidnog praha." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:075562

Žalac, M. (2020). 'Sinteriranje lijevane aluminijeve oksidne keramike uz uporabu dijela otpadnog aluminijevog oksidnog praha', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 29 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:075562

Žalac M. Sinteriranje lijevane aluminijeve oksidne keramike uz uporabu dijela otpadnog aluminijevog oksidnog praha [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2020 [cited 2024 November 29] Available at: https://urn.nsk.hr/urn:nbn:hr:235:075562

M. Žalac, "Sinteriranje lijevane aluminijeve oksidne keramike uz uporabu dijela otpadnog aluminijevog oksidnog praha", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:235:075562

Metadata
TitleSinteriranje lijevane aluminijeve oksidne keramike uz uporabu dijela otpadnog aluminijevog oksidnog praha
Title (english)Sintering of slip-cast alumina ceramics using a part of waste alumina powder
AuthorMiroslav Žalac
MentorIrena Žmak (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2020-02-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Basic Technical Sciences
Materials
Abstract
Rad prikazuje mogućnost uporabe aluminijeve oksidne keramike s različitim udjelom otpadnog keramičkog praha, te usporedbu gustoće, sakupljanja i mikrostrukture prije i poslije sinteriranja. Otpadni prah nastaje različitim postupcima obrade (kao na primjer: brušenje, tokarenje, glodanje itd.) zelenih sirovaca. Navedeni sekundarni (otpadni) prah ne zagađuje okoliš, te se smije odlagati na uređena odlagalištu otpada, no problem je što se ne može razgraditi. U ovom radu proučena je mogućnost uporabe otpadnog praha aluminijeva oksida njegovim dodavanjem u novi keramički prah. Postupkom lijevanja stabilnih vodenih Al2O3 suspenzija izrađeni su uzorci bez i s 20 % sekundarnog praha, te je dodatno uzorcima, nakon primjene konvencionalnog postupka sinteriranja, određena Arhimedova gustoća i sakupljanje te analizirana mikrostruktura.
Abstract (english)
The Bachelor thesis shows the possibility of using aluminium oxide (or alumina) ceramics with different content of waste ceramic powder and a comparison of density, shrinkage and microstructure before and after sintering. Waste powder is produced by various machining operations (such as: grinding, turning, milling, etc.) of ceramic green bodies. The specified secondary (i.e. waste) powder does not pollute the environment and may be disposed of in a legal landfill, but the problem is that it cannot be broken down. This thesis studies the possibility of using scrap aluminium oxide powder by adding it to the new ceramic powder. The process of casting a stable aqueous Al2O3 suspension produced samples without and with 20 % of the secondary powder. Samples were sintered using the conventional sintering procedure, the Archimedes density and shrinkage were determined, and the microstructure was analyzed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:075562
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-02-25 11:05:28