prikaz prve stranice dokumenta Mikrovalno sinteriranje aluminijeve oksidne keramike uz upotrebu dijela otpadnog praha
  Download
PDF 1.62 MB
undergraduate thesis
Mikrovalno sinteriranje aluminijeve oksidne keramike uz upotrebu dijela otpadnog praha
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. urn:nbn:hr:235:475735
Ljubek, Mihaela
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Ljubek, M. (2020). Mikrovalno sinteriranje aluminijeve oksidne keramike uz upotrebu dijela otpadnog praha (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:475735

Ljubek, Mihaela. "Mikrovalno sinteriranje aluminijeve oksidne keramike uz upotrebu dijela otpadnog praha." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:475735

Ljubek, Mihaela. "Mikrovalno sinteriranje aluminijeve oksidne keramike uz upotrebu dijela otpadnog praha." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:475735

Ljubek, M. (2020). 'Mikrovalno sinteriranje aluminijeve oksidne keramike uz upotrebu dijela otpadnog praha', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 18 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:475735

Ljubek M. Mikrovalno sinteriranje aluminijeve oksidne keramike uz upotrebu dijela otpadnog praha [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2020 [cited 2024 December 18] Available at: https://urn.nsk.hr/urn:nbn:hr:235:475735

M. Ljubek, "Mikrovalno sinteriranje aluminijeve oksidne keramike uz upotrebu dijela otpadnog praha", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:235:475735

Metadata
TitleMikrovalno sinteriranje aluminijeve oksidne keramike uz upotrebu dijela otpadnog praha
Title (english)Microwave sintering of aluminum oxide ceramics using a part of waste powder
AuthorMihaela Ljubek
MentorIrena Žmak (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2020-02-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je prikazana priprema stabilne vodene suspenzije praha Al2O3 s dodatkom i bez dodatka otpadnog praha Al2O3 u udjelu od 20 % ukupne suhe mase praha. Udio suhog keramičkog praha u vodenoj suspenziji iznosio je 70 % mase. Nakon određivanja sastava stabilne suspenzije, vodene suspenzije su ulivene u gipsane kalupe. Dobiveni keramički sinterirani su u hibridnoj peći koja kombinira konvencionalno i mikrovalno zagrijavanje uzoraka. Na temelju provedenih mjerenja Arhimedove gustoće, izračunatog skupljanja i relativne gustoće te analiziranja mikrostrukture dobiveni su podaci i doneseni zaključci o utjecaju zamijene dijela čistog novog praha Al2O3 dodavanjem otpadnog praha Al2O3.
Abstract (english)
This Bachelor thesis presents the preparation of a stable aqueous suspension of Al2O3 (aluminium oxide) powder with a proportion of waste Al2O3 powder. The effect of replacing virgin powder with 20 % of waste powder was tested. Aqueous suspensions with 70 wt. % of alumina powders were poured into plaster moulds. The green ceramic bodies were be sintered in a hybrid furnace that combines conventional and microwave heating. Based on the measurements of the Archimedes density, calculated shrinkage and relative density, as well as the microstructure analysis, data on the effect of replacing a part of virgin with waste alumina powder were obtained and conclusions were drawn.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:475735
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-02-25 19:47:39