prikaz prve stranice dokumenta Autonomni uređaj za skupljanje plutajućeg otpada
  Download
PDF 3.36 MB
undergraduate thesis
Autonomni uređaj za skupljanje plutajućeg otpada
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. urn:nbn:hr:235:608205
Grubelić, Domagoj
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Grubelić, D. (2020). Autonomni uređaj za skupljanje plutajućeg otpada (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:608205

Grubelić, Domagoj. "Autonomni uređaj za skupljanje plutajućeg otpada." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:608205

Grubelić, Domagoj. "Autonomni uređaj za skupljanje plutajućeg otpada." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:608205

Grubelić, D. (2020). 'Autonomni uređaj za skupljanje plutajućeg otpada', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:608205

Grubelić D. Autonomni uređaj za skupljanje plutajućeg otpada [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2020 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:235:608205

D. Grubelić, "Autonomni uređaj za skupljanje plutajućeg otpada", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:235:608205

Metadata
TitleAutonomni uređaj za skupljanje plutajućeg otpada
Title (english)Autonomous device for floating waste collection
AuthorDomagoj Grubelić
MentorNeven Pavković (mentor)
Committee memberNeven Pavković (predsjednik povjerenstva)
Committee memberNenad Bojčetić (član povjerenstva)
Committee memberNenad Kranjčević (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2020-02-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu prikazan je postupak konstruiranja autonomnog uređaja za čišćenje plutajućeg otpada. Uređaj treba izvesti tako da koristi električnu energiju za pogon i eventualno solarne ćelije. Primarna namjena je za marine, luke i lučice. Na početku rada dan je uvod koji govori o nautičkom turizmu i problemu otpada u moru koji se pojavljuje kao posljedica. Nakon toga napravljena je analiza tržišta postojećih proizvoda i inovativnih koncepata. Zatim je izrađena funkcijska dekompozicija sa objašnjenjem pripadajućih podfunkcija, iz čega slijedi morfološka matrica koja sadrži neka od mogućih rješenja funkcija koje uređaj obavlja. Uz korištenje morfološke matrice napravljena su dva konceptna rješenja koja su potom vrednovana, a bolji koncept je detaljno razrađen. Za odabrani koncept izrađen je potrebni proračun, 3D model te tehnička dokumentacija.
Abstract (english)
This bachelor thesis shows process of designing autonomous device for floating waste collection. Device should be developed using electric energy as source of power and possibly solar cells. Primary use is for harbors and small ports. In start of the thesis is given introduction speaking about nautical tourism and problems of waste in the sea which occurs as consequence. After that market analysis of existing products and innovative concepts was made. Then function decomposition with proper explaination of its subfunctions was created, from which follows morphological matrix containing some of possible solutions of the functions device is managing. Using morphological matrix two concepts were generated and afterwards evaluated, with the better concept being thoroughly elaborated. For selected concept 3D model was made with required calcualtion and tehnical documentation.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:608205
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2020-02-26 07:20:26