prikaz prve stranice dokumenta Utjecaj usmjerene strukture na abrazijsku otpornost austenitnog nehrđajućeg čelika
  Download
PDF 2.26 MB
undergraduate thesis
Utjecaj usmjerene strukture na abrazijsku otpornost austenitnog nehrđajućeg čelika
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. urn:nbn:hr:235:846947
Šargač, Juraj
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Šargač, J. (2020). Utjecaj usmjerene strukture na abrazijsku otpornost austenitnog nehrđajućeg čelika (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:846947

Šargač, Juraj. "Utjecaj usmjerene strukture na abrazijsku otpornost austenitnog nehrđajućeg čelika." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:846947

Šargač, Juraj. "Utjecaj usmjerene strukture na abrazijsku otpornost austenitnog nehrđajućeg čelika." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:846947

Šargač, J. (2020). 'Utjecaj usmjerene strukture na abrazijsku otpornost austenitnog nehrđajućeg čelika', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 01 August 2024, https://urn.nsk.hr/urn:nbn:hr:235:846947

Šargač J. Utjecaj usmjerene strukture na abrazijsku otpornost austenitnog nehrđajućeg čelika [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2020 [cited 2024 August 01] Available at: https://urn.nsk.hr/urn:nbn:hr:235:846947

J. Šargač, "Utjecaj usmjerene strukture na abrazijsku otpornost austenitnog nehrđajućeg čelika", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:235:846947

Metadata
TitleUtjecaj usmjerene strukture na abrazijsku otpornost austenitnog nehrđajućeg čelika
Title (english)Effect of anisotropic structure on abrasive wear resistance of austenitic stainless steel
AuthorJuraj Šargač
MentorVera Rede (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2020-02-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Basic Technical Sciences
Materials
Abstract
Cilj ovoga rada bio je utvrditi kako usmjerenost strukture ploče austenitnog nehrđajućeg čelika oznake X2CrNiMo17-12-2 utječe na abrazijsku otpornost. U teorijskom dijelu navedene su i opisane vrste nehrđajućih čelika, osnovni mehanizmi trošenja, abrazijsko trošenje i fenomen kritične veličine abrazijskog zrna. U eksperimentalnom dijelu rada provedena je analiza mikrostrukture, izmjerena je mikrotvrdoća HV0,2 i ispitana je otpornost na abrazijsko trošenje na uređaju Taber abrader pri različitim kvalitetama brusnog papira. Rezultati ispitivanja pokazali su da usmjerenost strukture utječe na mikrotvrdoću i abrazijsku otpornost. Najveća tvrdoća izmjerena je u presjeku okomitom na smjer valjanja, a najmanji kumulativni gubitak mase na svim brusnim papirima izmjeren je na presjeku paralelnom sa smjerom valjanja. Time je potvrđeno da otpornost na abrazijsko trošenje nije uvijek u direktnoj korelaciji s tvrdoćom materijala. Kod svih uzoraka izražen je fenomen kritične veličine abrazivnog zrna.
Abstract (english)
The purpose of this paper was to determine the effect of anisotropic structure on abrasive wear resistance of X2CrNiMo17-12-2 austenitic stainless steel plate. The theoretical part of this paper describes various types of stainless steel, basic wear mechanisms, especially abrasive wear and the phenomenon of critical particle size in abrasion wear. The experimental part consists of microstructure analysis, HV0,2 microhardness measurement, and abrasive wear resistance test conducted on a Taber abrader device with different qualities of abrasive papers. Test results have shown that the anisotropic structure has an observable effect on the microhardness and abrasive wear resistance. The highest hardness value was measured for the cross-section perpendicular to the direction of rolling, whereas the cross-section parallel to the rolling direction had the lowest total mass loss. That confirms the fact that abrasive wear resistance is not always in direct correlation to the material hardness. All samples have exhibited the critical particle size phenomenon in abrasive wear resistance tests.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:846947
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-02-26 09:12:42