prikaz prve stranice dokumenta Modernizacija upravljačkog sustava stroja za poliranje kamena
  Download
PDF 3.76 MB
undergraduate thesis
Modernizacija upravljačkog sustava stroja za poliranje kamena
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. urn:nbn:hr:235:975322
Matić, Patrik
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Matić, P. (2020). Modernizacija upravljačkog sustava stroja za poliranje kamena (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:975322

Matić, Patrik. "Modernizacija upravljačkog sustava stroja za poliranje kamena." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:975322

Matić, Patrik. "Modernizacija upravljačkog sustava stroja za poliranje kamena." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:975322

Matić, P. (2020). 'Modernizacija upravljačkog sustava stroja za poliranje kamena', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 13 July 2024, https://urn.nsk.hr/urn:nbn:hr:235:975322

Matić P. Modernizacija upravljačkog sustava stroja za poliranje kamena [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2020 [cited 2024 July 13] Available at: https://urn.nsk.hr/urn:nbn:hr:235:975322

P. Matić, "Modernizacija upravljačkog sustava stroja za poliranje kamena", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:235:975322

Metadata
TitleModernizacija upravljačkog sustava stroja za poliranje kamena
Title (english)Design of control system for stone polishing machine
AuthorPatrik Matić
MentorToma Udiljak (mentor)
Committee memberToma Udiljak (predsjednik povjerenstva)
Committee memberDamir Ciglar (član povjerenstva)
Committee memberTomislav Staroveški (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2020-02-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U ovom radu razrađen je proces preinake klasičnog portalnog stroja za poliranje kamena starog preko četrdeset godina u numerički upravljani stroj preko korisničkog sučelja (HMI, eng. Human Machine Interface). Želja naručitelja jest povećanje efikasnosti i ponovljivosti rada spomenutog stroja uz što manja financijska ulaganja. Zbog dostupnosti opreme za potrebe izrade ovog projekta korišten je model „Samba SM43-J“ tvrtke „Unitronics“. Naime, odabrani model je simbioza PLC-a (Programmble Logic Control) i HMI-a, te nudi jednostavne pakete s brojnim vodičima i uputstvima za upotrebu za lakše snalaženje, a uz sve to cjenovno je prigodan. Glavni zadatak je bio napraviti upravljački elekto ormar te PLC upravljački program za upravljanje portalnim strojem za poliranje kamena. Drugim riječima rad se temelji na „retrofitingu“ postojećeg stroja što bi u prijevodu bilo naknadna nadogradnja tj. modernizacija i unaprijeđivanje postojećeg stroja. Zbog većeg opsega zahvata „retrofitinga“, projekt je podijeljen u dva dijela: upravljački dio obuhvaćen ovim radom te idejni prijedlog konstrukcijskih preinaka stroja. Detalji o konstrukcijskim preinakama stroja su dostupni u Završnom radu kolege Luke Markičevića [6].
Abstract (english)
This paper elaborates the process of modifying a classic portal stone polishing machine over forty years old in a numerically controlled machine via a human machine interface (HMI). The desire of the client is to increase the efficiency and re-operation of the said machine with the least financial investment. Due to the availability of equipment for the purposes of this project, the Unitronics model Samba SM43-J was used. Specifically, the model chosen is a symbiosis of PLC (Programmable Logic Control) and HMI, which offers a simple package with numerous guides and instructions for easy reference and it has a convenient price. The main task was to create a control cabinet and a PLC driver to operate a portal stone polishing machine. In other words, it is based on the "retrofitting" of existing machines, which in translation means to subsequently upgrade or modernize and improve the existing machine Due to the magnitude of the procedure of retrofitting, the project is divided into two parts: the maneuver part is covered by this work and the ideal proposal for structural modifications of the machine. Details of the structural modifications of the machine are in the Finishing work of my colleague Luka Markičević [6].
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:975322
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-02-27 12:01:17