prikaz prve stranice dokumenta Pouzdanost karakterizacije ekspandiranoga polistirena pomoću računalne radiografije
  Download
PDF 5.55 MB
doctoral thesis
Pouzdanost karakterizacije ekspandiranoga polistirena pomoću računalne radiografije
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. urn:nbn:hr:235:911228
Hrman, Danijela
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Hrman, D. (2015). Pouzdanost karakterizacije ekspandiranoga polistirena pomoću računalne radiografije (Doctoral thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:911228

Hrman, Danijela. "Pouzdanost karakterizacije ekspandiranoga polistirena pomoću računalne radiografije." Doctoral thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. https://urn.nsk.hr/urn:nbn:hr:235:911228

Hrman, Danijela. "Pouzdanost karakterizacije ekspandiranoga polistirena pomoću računalne radiografije." Doctoral thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2015. https://urn.nsk.hr/urn:nbn:hr:235:911228

Hrman, D. (2015). 'Pouzdanost karakterizacije ekspandiranoga polistirena pomoću računalne radiografije', Doctoral thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 05 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:911228

Hrman D. Pouzdanost karakterizacije ekspandiranoga polistirena pomoću računalne radiografije [Doctoral thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2015 [cited 2024 November 05] Available at: https://urn.nsk.hr/urn:nbn:hr:235:911228

D. Hrman, "Pouzdanost karakterizacije ekspandiranoga polistirena pomoću računalne radiografije", Doctoral thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2015. Available at: https://urn.nsk.hr/urn:nbn:hr:235:911228

Metadata
TitlePouzdanost karakterizacije ekspandiranoga polistirena pomoću računalne radiografije
Title (english)Reliability of characterization of expanded polystyrene using computed radiography
AuthorDanijela Hrman
MentorDamir Markučič (mentor)
Committee memberJosip Stepanić (predsjednik povjerenstva)
Committee memberDamir Markučič (član povjerenstva)
Committee memberMladen Crneković (član povjerenstva)
Committee memberZdravko Schauperl (član povjerenstva)
Committee memberIvica Kušević (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2015-03-05, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Universal decimal classification
(UDC)		620 - Materials testing. Power stations. Economics of energy
678 - Industries based on macromolecular materials. Rubber industry. Plastics industry
Abstract
Tijekom posljednjeg desetljeća bilježi se intenzivan razvoj tehnike računalne radiografije, cRT (od eng. Computed Radiography Technique), uz istovremeno globalno prihvaćanje tehnologije i u području industrijske radiografije. Implementacija u polje građevinske industrije može se u najvećoj mjeri zahvaliti potencijalnoj primjeni cRT sustava u svrhu karakterizacije materijala u procjenama kvalitete proizvodnje. Obzirom na karakteristike toplinsko izolacijskih materijala ćelijaste strukture koji se koriste u građevinarstvu, kao na primjer ekspandirani polistiren, kvantifikacija pouzdanosti računalne radiografije postaje imperativ. Spoznaja da nema razvijene metodologije računalne radiografije za karakterizaciju nemetalnih materijala kao niti ćelijastih struktura predstavlja motivaciju istraživanja. Da bi se sagledao sadržaj radiografskog slikovnog zapisa, a potom sadržaj i vjerodostojno interpretirao i evaluirao, nužno je poznavati utjecaj pojedinih komponenti karakterizacijskog niza na kvalitetu digitalnog zapisa radiografske slike. Stoga, cilj ove doktorske disertacije je razvoj nove metode karakterizacije materijala ćelijastih struktura, poput ekspandiranoga polistirena, pomoću tehnike računalne radiografije.
Abstract (english)
Over the last decade there has been an intensive development of computed radiography technique, cRT, and at the same time there is an acceptance of technology in the field of industrial radiography. Implementation in the field of building industry may be largely due to the potential application of cRT systems for the purpose of the characterization of materials assessment of production quality. Due to the characteristics of thermal insulation materials with cellular structures used in the building industry, such as expanded polystyrene, quantification of the reliability of computed radiography becomes an imperative. The realization, that there is no developed methodology of characterization of non-metallic materials and materials with cellular structures, represents motivation for this research. In order to grasp the content of digital radiographic image, and then to credibly interprete and evaluate it, it is necessary to understand the influence of all individual components of characterization series on the quality of digital radiographic image. Following that, the aim of this dissertation is to develop new method for the characterization of materials with cell structures, like expanded polystyrene, using computed radiography technique.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:911228
Study programmeTitle: Mechanical Engineering and Naval Architecture
Study programme type: university
Study level: postgraduate
Academic / professional title: doktor/doktorica znanosti, područje tehničkih znanosti (doktor/doktorica znanosti, područje tehničkih znanosti)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-04-20 12:22:53