prikaz prve stranice dokumenta Analiza topografije površine primjenom mikroskopa atomskih sila
  Download
PDF 1.86 MB
undergraduate thesis
Analiza topografije površine primjenom mikroskopa atomskih sila
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. urn:nbn:hr:235:925446
Razumić, Fran
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Razumić, F. (2020). Analiza topografije površine primjenom mikroskopa atomskih sila (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:925446

Razumić, Fran. "Analiza topografije površine primjenom mikroskopa atomskih sila." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:925446

Razumić, Fran. "Analiza topografije površine primjenom mikroskopa atomskih sila." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:925446

Razumić, F. (2020). 'Analiza topografije površine primjenom mikroskopa atomskih sila', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 22 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:925446

Razumić F. Analiza topografije površine primjenom mikroskopa atomskih sila [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2020 [cited 2024 November 22] Available at: https://urn.nsk.hr/urn:nbn:hr:235:925446

F. Razumić, "Analiza topografije površine primjenom mikroskopa atomskih sila", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:235:925446

Metadata
TitleAnaliza topografije površine primjenom mikroskopa atomskih sila
Title (english)Analysis of surface topography using an atomic force microscope
AuthorFran Razumić
MentorBiserka Runje (mentor)
MentorAmalija Horvatić Novak (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2020, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Precision Mechanical Engineering
Abstract
Mikroskop atomskih sila (engl. Atomic Force Microscope – AFM) pripada grupi mikroskopa s ticalima. AFM radi na principu raster skeniranja uzoraka. Skeniranje se provodi oštrim vrhom ticala koje, ovisno o odabranom načinu rada, dotiče ili prolazi veoma blizu površine predmeta koji se ispituje. Ispitivanje površine AFM-om ne traži posebnu pripremu uzorka koji se ispituje, a rezultat ispitivanja strukture površine do razine atoma dan je 3D prikazom. Mikroskopi atomskih sila pogodni su za ispitivanje površine materijala, atoma i molekula, individualnih makromolekula te bioloških podvrsta. U prvom dijelu rada navedene su metode i uređaji koji se koriste za analizu topografije površine. U drugom dijelu rada pobliže je opisan AFM, prikazane su metode rada AFM-a i navedeni primjeri za svaku od metoda. Na posljetku, primjenom mikroskopa atomskih sila, napravljena analiza topografije površine odabranih uzoraka i etalona. Pri izradi ovog rada, za analizu i obradu topografija površina korišten je program Mountains SPIP (probna verzija).
Abstract (english)
The atomic force microscope (AFM) belongs to the group of microscopes with tentacles. AFM works on the principle of raster scanning of samples. Scanning is performed with a sharp tip of the probe which, depending on the selected mode, touches or passes very close to the surface of the object under test. Examination of the surface by AFM does not require special preparation of the sample, and the result of the examination of the surface structure up to the atomic level is given by 3D representation. Atomic force microscopes are suitable for examining the surface of materials, atoms and molecules, individual macromolecules and biological subspecies. The first part of the dissertation the methods and devices used for surface topography analysis. The second part of the dissertation describes AFM in more detail, shows the methods of AFM operation and gives examples for each of the methods. Finally, using an atomic force microscope, an analysis of the surface topography of the selected samples and standards was made. During the preparation of this dissertation, the Mountains SPIP program (trial version) was used for the analysis and processing of surface topographies.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:925446
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2020-09-21 10:19:53