prikaz prve stranice dokumenta Aditivna proizvodnja od recikliranog polimernog materijala
  Download
PDF 4.16 MB
undergraduate thesis
Aditivna proizvodnja od recikliranog polimernog materijala
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. urn:nbn:hr:235:832283
Barišić, Klara
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Barišić, K. (2020). Aditivna proizvodnja od recikliranog polimernog materijala (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:832283

Barišić, Klara. "Aditivna proizvodnja od recikliranog polimernog materijala." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:832283

Barišić, Klara. "Aditivna proizvodnja od recikliranog polimernog materijala." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2020. https://urn.nsk.hr/urn:nbn:hr:235:832283

Barišić, K. (2020). 'Aditivna proizvodnja od recikliranog polimernog materijala', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 23 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:832283

Barišić K. Aditivna proizvodnja od recikliranog polimernog materijala [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2020 [cited 2024 December 23] Available at: https://urn.nsk.hr/urn:nbn:hr:235:832283

K. Barišić, "Aditivna proizvodnja od recikliranog polimernog materijala", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:235:832283

Metadata
TitleAditivna proizvodnja od recikliranog polimernog materijala
Title (english)Additive manufacturing of recycled polymer material
AuthorKlara Barišić
MentorMladen Šercer (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2020-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U ovom radu ukratko su opisane metode aditivne proizvodnje, te su kroz medij 3D printanja istražene mogućnosti oporabe polimera. Uz postupke aditivne proizvodnje u ovom radu su također opisane vrste polimera, polimeri korišteni u aditivnoj proizvodnji te mogućnost primjene recikliranih polimera u aditivnoj proizvodnji, kao i način dobivanja filamenta za 3D printanje. U eksperimentalnom dijelu ovog rada nastojalo se usporediti rastezne čvrstoće recikliranog i izvornog polimera pod nazivom polilaktična kiselina (PLA) na epruvetama dobivenim 3D printanjem. Usporedbom rezultata dvaju ispitivanja, te na temelju informacija danih u teorijskom dijelu rada, u zaključku se raspravlja o prikladnosti recikliranja polimera kao načina zbrinjavanja polimernog otpada u kontekstu aditivne proizvodnje, ali i šire.
Abstract (english)
This thesis concisely describes methods of 3D printing, and investigates the possibilities of polymer recovery through the 3D printing technologies. Types of polymers, polymers used in additive manufacturing, the possibilities of using recycled polymers in 3D printing and the production of filaments for use in 3D printing is also described. The experimental part of the thesis examines the flexural strength of recycled and virgin 3D printed PLA. The results are compared and discussed, alongside the information given in the theoretical part of the thesis, in order to establish whether recycling is suitable as part of the solution for polymer waste management in terms of additive manufacturing, and in general.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:832283
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-09-25 10:08:29