prikaz prve stranice dokumenta Utjecaj obrade površine laserskim snopom na kut kvašenja Ti legure
  Download
PDF 2.57 MB
master's thesis
Utjecaj obrade površine laserskim snopom na kut kvašenja Ti legure
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:235:836218
Školnik, Luka
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Školnik, L. (2021). Utjecaj obrade površine laserskim snopom na kut kvašenja Ti legure (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:836218

Školnik, Luka. "Utjecaj obrade površine laserskim snopom na kut kvašenja Ti legure." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:836218

Školnik, Luka. "Utjecaj obrade površine laserskim snopom na kut kvašenja Ti legure." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:836218

Školnik, L. (2021). 'Utjecaj obrade površine laserskim snopom na kut kvašenja Ti legure', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 11 August 2024, https://urn.nsk.hr/urn:nbn:hr:235:836218

Školnik L. Utjecaj obrade površine laserskim snopom na kut kvašenja Ti legure [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2021 [cited 2024 August 11] Available at: https://urn.nsk.hr/urn:nbn:hr:235:836218

L. Školnik, "Utjecaj obrade površine laserskim snopom na kut kvašenja Ti legure", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:235:836218

Metadata
TitleUtjecaj obrade površine laserskim snopom na kut kvašenja Ti legure
Title (english)Influence of laser beam surface treatment on the wetting angle of Ti alloy
AuthorLuka Školnik
MentorSuzana Jakovljević (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2021-01-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Istraživanja kuta kvašenja na legurama titanija vrlo su raširena te se titanij često koristi kao biomaterijal ili se prevlači tankim tvrdim prevlakama u svrhu poboljšanja triboloških svojstava. U oba slučaja je u kontaktu s kapljevinom te je važno poznavati svojstva kvašenja. Dan je pregled dosadašnjih istraživanja u pogledu kuta kvašenja na površinama legura titanija. U eksperimentalnom dijelu rada ispitivana su svojstva kvašenja na leguri Ti6Al4V nakon obrade laserski snopom. Praćeno je ponašanje kuta kvašenja nakon 20 i 60 sekundi pri nagibima od 0°, 30° i 60°. Izmjereni su parametri hrapavosti te su površine uzoraka analizirane skenirajućim elektronskim mikroskopom.
Abstract (english)
Contact angle studies on titanium alloys are very common today because titanium is frequently used as a biomaterial or coated with thin hard coatings for the purpose of improving tribological properties. In both cases it is in contact with the liquid and it is important to know the contact angle properties. An overview of previous research regarding wetting on the surfaces of titanium alloys is given. In the experimental part of the paper, the contact angle properties of Ti6Al4V alloy after laser treatment were studied. The behavior of the contact angle after 20 and 60 seconds at inclinations of 0°, 30° and 60° was monitored. Roughness parameters were measured and sample surfaces were analyzed with a scanning electron microscope.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:836218
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2021-01-14 02:35:22