prikaz prve stranice dokumenta Razvoj konstrukcijskih principa temeljenih na mogućnostima DMLS proizvodnog postupka
  Download
PDF 3.34 MB
master's thesis
Razvoj konstrukcijskih principa temeljenih na mogućnostima DMLS proizvodnog postupka
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:235:726975
Novak, Regina
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Novak, R. (2021). Razvoj konstrukcijskih principa temeljenih na mogućnostima DMLS proizvodnog postupka (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:726975

Novak, Regina. "Razvoj konstrukcijskih principa temeljenih na mogućnostima DMLS proizvodnog postupka." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:726975

Novak, Regina. "Razvoj konstrukcijskih principa temeljenih na mogućnostima DMLS proizvodnog postupka." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:726975

Novak, R. (2021). 'Razvoj konstrukcijskih principa temeljenih na mogućnostima DMLS proizvodnog postupka', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 30 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:726975

Novak R. Razvoj konstrukcijskih principa temeljenih na mogućnostima DMLS proizvodnog postupka [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2021 [cited 2024 November 30] Available at: https://urn.nsk.hr/urn:nbn:hr:235:726975

R. Novak, "Razvoj konstrukcijskih principa temeljenih na mogućnostima DMLS proizvodnog postupka", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:235:726975

Metadata
TitleRazvoj konstrukcijskih principa temeljenih na mogućnostima DMLS proizvodnog postupka
Title (english)Development of design principles based on DMLS manufacturing process
AuthorRegina Novak
MentorNenad Bojčetić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2021-01-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je opisana aditivna proizvodnja metala s naglaskom na DMLS (eng. Direct metal laser sintering) proizvodni postupak. Utvrđeni su i opisani principi za aditivnu proizvodnju metala koji pomažu konstruktorima u ranim fazama razvoja proizvoda. Principi aditivne proizvodnje metala drugačiji su od tradicionalnih metoda proizvodnje. Opisan je postupak metodologije koji se sastoji od sakupljanja proizvoda za analizu izrađenih DMLS proizvodnim postupkom, izrade funkcijskih struktura proizvoda, analize proizvoda i funkcijskih struktura, mapiranja značajki s funkcijama, identifikacije konstrukcijskih principa, smjernica za oblikovanje i parametara za proizvodnju te izrade CAD modela i fizičkih modela. Analizom postojećih proizvoda identificirano je 15 principa temeljenih na mogućnostima i karakteristikama DMLS proizvodnog postupka. Također su izrađeni i CAD modeli koji prikazuju pojedinačne principe. Na kraju, pojedinačni principi su grupirani te su prikazani na pet CAD modela koji su kasnije i izrađeni DMLS proizvodnim postupkom. Prikazani konstrukcijski principi, potiču kreativnost, sugeriraju rješenje za dani problem ili potiču razvoj nove ideje u ranoj fazi razvoja proizvoda aditivnom proizvodnjom metala.
Abstract (english)
The paper describes additive metal production with an emphasis on DMLS (Direct metal laser sintering) production process. The principles for additive metal production, which help designers in the early stages of product development, have been established and described. The principles of additive metal production are different from traditional production methods. The described methodology consists of collecting products for analyzing made by DMLS production process, making functional structures of products, analyzing products and functional structures, mapping features with functions, identifying design principles, design guidelines and parameters for production and making CAD models and physical models. By analyzing existing products, 15 principles are identified based on the capabilities and characteristics of DMLS production process. CAD models with individual principles were also developed. Finally, the individual principles were grouped and presented on five CAD models that were later developed by the DMLS production process. The presented construction principles encourage creativity, suggest a solution to a given problem or encourage the development of a new idea at an early stage of product development by additive metal production.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:726975
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Embargo expiration date: 2023-01-01
Terms of useLicence In copyright icon
Created on2021-01-14 17:19:50