prikaz prve stranice dokumenta Utjecaj orijentacije drvnih stanica na tvrdoću drva
  Download
PDF 2.86 MB
undergraduate thesis
Utjecaj orijentacije drvnih stanica na tvrdoću drva
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:235:923745
Klanac, Josip
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Klanac, J. (2021). Utjecaj orijentacije drvnih stanica na tvrdoću drva (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:923745

Klanac, Josip. "Utjecaj orijentacije drvnih stanica na tvrdoću drva." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:923745

Klanac, Josip. "Utjecaj orijentacije drvnih stanica na tvrdoću drva." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:923745

Klanac, J. (2021). 'Utjecaj orijentacije drvnih stanica na tvrdoću drva', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:923745

Klanac J. Utjecaj orijentacije drvnih stanica na tvrdoću drva [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2021 [cited 2024 December 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:923745

J. Klanac, "Utjecaj orijentacije drvnih stanica na tvrdoću drva", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:235:923745

Metadata
TitleUtjecaj orijentacije drvnih stanica na tvrdoću drva
Title (english)Influence of wood cell orientation on hardness of wood
AuthorJosip Klanac
MentorVera Rede (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2021-02-25, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Osnovni cilj rada bio je istražiti utjecaj usmjerenosti strukture na tvrdoću drva obične smreke (Picea abies). U teorijskom dijelu rada opisana je struktura drva, od makrostrukture do mikrostrukture te osnovna mehanička svojstva drva. U eksperimentalnom dijelu prikazani su rezultati dobiveni mjerenjem tvrdoće po Brinellu u ovisnosti o usmjerenosti strukture. Površina na kojoj je izmjerena tvrdoća zakretala se od poprečnog (RT) do tangencijalnog (LT) presjeka u intervalima od po 15°. Za svaki kut napravljeno je deset mjerenja. Utvrđeno je da usmjerenost strukture ima veliki utjecaj na tvrdoću drva. Najviše vrijednosti tvrdoće dobivene su u poprečnom (50,0 HB), a najniže u tangencijalnom presjeku (26,1 HB). Rasipanja rezultata su relativno velika, a koeficijent varijacije za sve kutove ispitivanja kreće se u rasponu od 10,55 % do 19,85 %, što je manje od dopuštenog (20%).
Abstract (english)
The main aim of the study was to investigate the influence of the orientation of the structure on the hardness of spruce (Picea abies) wood. The theoretical part of the paper describes the structure of wood, from macrostructure to microstructure and the basic mechanical properties of wood. In the experimental part, the results obtained by measuring Brinell hardness as a function of the orientation of the structure are presented. The surface on which the hardness was measured rotated from the transverse (RT) to the tangential (LT) cross-section at 15° intervals. Ten measurements were made for each angle. The orientation of the structure was found to have a large influence on the hardness of the wood. The highest hardness values were obtained in the cross section (50.0 HB) and the lowest in the tangential cross section (26.1 HB). The scatter of the results is relatively large, and the coefficient of variation for all test angles ranges from 10.55 % to 19.85 %, which is less than allowed (20 %).
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:923745
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2021-02-23 18:55:03