prikaz prve stranice dokumenta Usporedba metoda za analizu ekološke prihvatljivosti u konceptualnoj fazi razvoja proizvoda
  Download
PDF 4.94 MB
master's thesis
Usporedba metoda za analizu ekološke prihvatljivosti u konceptualnoj fazi razvoja proizvoda
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:235:225537
Zuanović, Karla
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Zuanović, K. (2021). Usporedba metoda za analizu ekološke prihvatljivosti u konceptualnoj fazi razvoja proizvoda (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:225537

Zuanović, Karla. "Usporedba metoda za analizu ekološke prihvatljivosti u konceptualnoj fazi razvoja proizvoda." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:225537

Zuanović, Karla. "Usporedba metoda za analizu ekološke prihvatljivosti u konceptualnoj fazi razvoja proizvoda." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:225537

Zuanović, K. (2021). 'Usporedba metoda za analizu ekološke prihvatljivosti u konceptualnoj fazi razvoja proizvoda', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 18 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:225537

Zuanović K. Usporedba metoda za analizu ekološke prihvatljivosti u konceptualnoj fazi razvoja proizvoda [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2021 [cited 2024 December 18] Available at: https://urn.nsk.hr/urn:nbn:hr:235:225537

K. Zuanović, "Usporedba metoda za analizu ekološke prihvatljivosti u konceptualnoj fazi razvoja proizvoda", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:235:225537

Metadata
TitleUsporedba metoda za analizu ekološke prihvatljivosti u konceptualnoj fazi razvoja proizvoda
Title (english)Comparative study of eco-evaluation methods in conceptual phase of product development
AuthorKarla Zuanović
MentorMario Štorga (mentor)
MentorTomislav Martinec (komentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2021-04-01, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
U konceptualnoj fazi razvoja proizvoda potrebno je evaluirati više različitih koncepcijskih rješenja, na temelju različitih kriterija, kako bi se odredilo ono najbolje. Vrlo rijetko se kao kriterij pri odabiru koristi ekološka prihvatljivost koja zadnjih godina postaje ne samo trend, već i uvjet izlaska proizvoda na tržište kroz zadovoljavanje brojnih standarda i regulativa. U okviru ovog rada pregledana je znanstvena literatura iz područja vrednovanja ekološke prihvatljivosti. Mali broj metoda primjenjiv je u konceptualnoj fazi zbog nedostupnosti podataka o cijelom životnom ciklusu proizvoda. Iako je broj primjenjivih metoda vrlo ograničen, odabrane su četiri metode koje se mogu primijeniti u konceptualnoj fazi, dan je njihov detaljan opis te su provedene na konceptima uređaja za aditivnu proizvodnju (3D printerima). Uspoređeni su dobiveni rezultati te je dan osvrt na prednosti i nedostatke svake metode.
Abstract (english)
In the conceptual phase of product development, it is necessary to evaluate several different conceptual solutions, taking into account various criteria, in order to decide on the best one. Ecological impact, which is rarely used as a selection criterion, has become not only a trend in the recent years, but a requirement to enter the market through meeting numerous standards and regulations. A literature review of eco-evaluation methods is conducted in this paper. Very few methods are applicable in the conceptual phase due to the unavailability of data on the entire product life cycle. Although the number of applicable methods is very limited, four methods are selected that can be applied in the conceptual phase, described in detail and carried out on concepts of additive manufacturing devices (3D printers). The obtained results are compared and a review of the advantages and disadvantages of each method is given.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:225537
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2021-03-25 10:51:53