prikaz prve stranice dokumenta Izrada upravljačkog sustava 3D pisača velikog radnog volumena
  Download
PDF 3.5 MB
master's thesis
Izrada upravljačkog sustava 3D pisača velikog radnog volumena
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:235:804044
Kovačević, Matej
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Kovačević, M. (2021). Izrada upravljačkog sustava 3D pisača velikog radnog volumena (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:804044

Kovačević, Matej. "Izrada upravljačkog sustava 3D pisača velikog radnog volumena." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:804044

Kovačević, Matej. "Izrada upravljačkog sustava 3D pisača velikog radnog volumena." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:804044

Kovačević, M. (2021). 'Izrada upravljačkog sustava 3D pisača velikog radnog volumena', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 13 July 2024, https://urn.nsk.hr/urn:nbn:hr:235:804044

Kovačević M. Izrada upravljačkog sustava 3D pisača velikog radnog volumena [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2021 [cited 2024 July 13] Available at: https://urn.nsk.hr/urn:nbn:hr:235:804044

M. Kovačević, "Izrada upravljačkog sustava 3D pisača velikog radnog volumena", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:235:804044

Metadata
TitleIzrada upravljačkog sustava 3D pisača velikog radnog volumena
Title (english)Design of large volume 3D printer control system
AuthorMatej Kovačević
MentorTomislav Staroveški (mentor)
Committee memberIrena Žmak (predsjednik povjerenstva)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2021-04-01, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu opisan je proces parametriranja i puštanja u rad posmičnih prigona 3D pisača. Rad se sastoji od šest dijelova. Uvod govori o upravljačkim sustavima otvorene arhitekture kao i o razlozima njihove primjene. Nakon toga se detaljnije opisuje upravljački sustav korišten za izradu eksperimentalnog dijela diplomskog rada, odnosno LinuxCNC. Treći dio opisuje 3D pisač, odnosno komponente bitne za parametriranje stroja. Zatim su navedene logičke i funkcijske veze između pojedinih modula sustava. U petom poglavlju prikazani su rezultati rada ispitnog sustava. Naposljetku dan je zaključak rada.
Abstract (english)
This thesis describes the commissioning of servo motor based feed drives for the 3D printing machine. A brief overview of LinuxCNC, an open source software used in this thesis is described in the introductory part. The second part describes the 3D printer structure, and the components used to parameterize the operating system. All required system wiring is then listed and described. The fourth chapter deals with the design of the experiment. Concluding remarks are given in the last chapter of this thesis.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:804044
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2021-03-31 18:55:18