prikaz prve stranice dokumenta Projektiranje i izrada grafitnih elektroda
  Download
PDF 8.96 MB
master's thesis
Projektiranje i izrada grafitnih elektroda
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:235:124818
Predovan, Bruno
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Predovan, B. (2021). Projektiranje i izrada grafitnih elektroda (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:124818

Predovan, Bruno. "Projektiranje i izrada grafitnih elektroda." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:124818

Predovan, Bruno. "Projektiranje i izrada grafitnih elektroda." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:124818

Predovan, B. (2021). 'Projektiranje i izrada grafitnih elektroda', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 17 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:124818

Predovan B. Projektiranje i izrada grafitnih elektroda [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2021 [cited 2024 November 17] Available at: https://urn.nsk.hr/urn:nbn:hr:235:124818

B. Predovan, "Projektiranje i izrada grafitnih elektroda", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:235:124818

Metadata
TitleProjektiranje i izrada grafitnih elektroda
Title (english)Design and manufacture of graphite electrodes
AuthorBruno Predovan
MentorDamir Ciglar (mentor)
MentorMiho Klaić (komentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2021-12-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Razvoj suvremene proizvodnje i konstruiranje sve složenijih proizvoda definira smjer razvoja obradnih sustava. Primjenom suvremenih materijala znatno boljih mehaničkih i fizikalnih svojstava, nameće se pitanje efikasnosti konvencionalnih postupaka obrade. Uz kontinuirano unaprjeđenje suvremenih materijala i proizvoda, razvijaju se brojni nekonvencionalni i hibridni procesi obrade. U ovom diplomskom radu opisani su svi značajniji nekonvencionalni postupci obrade odvajanjem. Podijeljeni su na nekoliko skupina, ovisno o vrsti energije koju koriste tijekom procesa obrade. Detaljno su opisani principi rada, njihova primjena te prednosti i nedostatci svakog procesa obrade. Poseban je naglasak stavljen na elektroerozijsku obradu, kao jedan od najbitnijih postupaka obrade u alatničarskoj industriji. Nadalje, detaljno je opisan postupak projektiranja grafitne elektrode za elektroeroziju. Opisan je postupak odabira materijala, analize površina, modeliranje površina i kreiranja EDM elektrode pomoću Tebis-ovog softverskog modula za izradu elektroda, izrada dokumentacije i NC programa za obradu te završna kontrola i mjerenje na CMM uređaju.
Abstract (english)
The development of modern production and the construction of increasingly complex products defines the direction of development of machining systems. By applying modern materials with significantly better mechanical and physical properties, the question of the efficiency of conventional processing procedures arises. With the continuous improvement of modern materials and products, numerous unconventional and hybrid machining processes are being developed. This thesis describes all significant unconventional separation processes. They are divided into several groups, depending on the type of energy they use during the processing. The principles of operation, their application and the advantages and disadvantages of each processing are described in detail. Special emphasis is placed on EDM, as one of the most important machining processes in the tool industry. Furthermore, the process of designing a graphite electrode for electroerosion is described in detail. The procedure of material selection, surface analysis, surface modeling and EDM electrode creation using Tebis software module for electrode fabrication, documentation preparation and NC processing program, and final control and measurement on the CMM device is described.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:124818
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution-NonCommercial 3.0 Unported (CC BY-NC 3.0) icon
Created on2021-12-02 18:04:34