prikaz prve stranice dokumenta Utjecaj opterećenja na tvrdoću kompozita s matricom od Al-legure ojačane česticama lebdećeg pepela
  Download
PDF 2.66 MB
master's thesis
Utjecaj opterećenja na tvrdoću kompozita s matricom od Al-legure ojačane česticama lebdećeg pepela
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:235:842721
Orešković, Luka
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Orešković, L. (2021). Utjecaj opterećenja na tvrdoću kompozita s matricom od Al-legure ojačane česticama lebdećeg pepela (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:842721

Orešković, Luka. "Utjecaj opterećenja na tvrdoću kompozita s matricom od Al-legure ojačane česticama lebdećeg pepela." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:842721

Orešković, Luka. "Utjecaj opterećenja na tvrdoću kompozita s matricom od Al-legure ojačane česticama lebdećeg pepela." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:235:842721

Orešković, L. (2021). 'Utjecaj opterećenja na tvrdoću kompozita s matricom od Al-legure ojačane česticama lebdećeg pepela', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:842721

Orešković L. Utjecaj opterećenja na tvrdoću kompozita s matricom od Al-legure ojačane česticama lebdećeg pepela [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2021 [cited 2024 December 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:842721

L. Orešković, "Utjecaj opterećenja na tvrdoću kompozita s matricom od Al-legure ojačane česticama lebdećeg pepela", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:235:842721

Metadata
TitleUtjecaj opterećenja na tvrdoću kompozita s matricom od Al-legure ojačane česticama lebdećeg pepela
Title (english)Load effect on the hardness of aluminium alloy - fly ash particulate-reinforced composites
AuthorLuka Orešković
MentorVera Rede (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2021-12-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je analiziran utjecaj opterećenja na tvrdoću kompozita AlSi7Mg ojačanog česticama lebdećeg pepela. Kompozit je dobiven compocasting postupkom i naknadno podvrgnut kutnom kanalnom prešanju u nekoliko prolaza. Analiziran je i utjecaj provlačenja na tvrdoću kompozita (HV0,02, HV0,05, HV0,1 i HV0,2). Dobiveni rezultati analizirani su Meyerovim zakonom koji opisuje utjecaj opterećenja na dobivene vrijednosti tvrdoće. Dobiveni rezultati ukazuju da broj provlačenja pri kutnom kanalnom prešanju intenzivno utječe na tvrdoću kompozita. Što je veći broj provlačenja veća je i tvrdoća materijala kod svih primijenjenih opterećenja. Najveći prirast tvrdoće zabilježen je nakon prvog provlačenja. Primijenjeno opterećenje pri mjerenju tvrdoće utječe na vrijednosti tvrdoće. Regresijskom analizom potvrđeno je da se Meyerov model može primijeniti za analizu utjecaja opterećenja na tvrdoću ispitivanog kompozita.
Abstract (english)
The paper analyzes the indentation size effect of AlSi7Mg composite reinforced with fly ash particles. The composite was obtained by the compocasting process and subsequently subjected to equal-channel angular pressing in several extrusions. The influence of extrusions on the hardness of composites (HV0,02, HV0,05, HV0,1 and HV0,2) was also analyzed. The obtained results were analyzed by Meyer's law which describes the influence of load on the obtained hardness values. The obtained results indicate that the number of extrusions during equal-channel angular pressing intensively affects the hardness of the composite. The higher the number of extrusions, the higher the hardness of the material at all applied loads. The highest increase in hardness was recorded after the first extrusion. The applied load when measuring the hardness affects the hardness values. Regression analysis confirmed that the Meyer model can be applied to analyze the influence of load on the hardness of the tested composite.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:842721
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2021-12-11 12:16:19