prikaz prve stranice dokumenta Razvoj PLC sustava za upravljanje zalijevanjem biljaka i okolišnim varijablama plastenika
  Download
PDF 2.74 MB
undergraduate thesis
Razvoj PLC sustava za upravljanje zalijevanjem biljaka i okolišnim varijablama plastenika
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:235:092297
Šlankovič, Matej
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Šlankovič, M. (2022). Razvoj PLC sustava za upravljanje zalijevanjem biljaka i okolišnim varijablama plastenika (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:092297

Šlankovič, Matej. "Razvoj PLC sustava za upravljanje zalijevanjem biljaka i okolišnim varijablama plastenika." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:092297

Šlankovič, Matej. "Razvoj PLC sustava za upravljanje zalijevanjem biljaka i okolišnim varijablama plastenika." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:092297

Šlankovič, M. (2022). 'Razvoj PLC sustava za upravljanje zalijevanjem biljaka i okolišnim varijablama plastenika', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:092297

Šlankovič M. Razvoj PLC sustava za upravljanje zalijevanjem biljaka i okolišnim varijablama plastenika [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2022 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:235:092297

M. Šlankovič, "Razvoj PLC sustava za upravljanje zalijevanjem biljaka i okolišnim varijablama plastenika", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:235:092297

Metadata
TitleRazvoj PLC sustava za upravljanje zalijevanjem biljaka i okolišnim varijablama plastenika
Title (english)Development of a PLC system for greenhouse plants watering and environmental variables control
AuthorMatej Šlankovič
MentorDanijel Pavković (mentor)
MentorMatija Krznar (komentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2022-03-02, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Automation and Robotics
Scientific / art field,
discipline and subdiscipline		BIOTECHNICAL SCIENCES
Agronomy
Abstract
Kroz ovaj rad, prikazano je softversko i hardversko rješenje automatizacije zaštićenoga prostora, konkretno plastenika za uzgoj biljaka. U uvodu je iznesen značaj i uloga zaštićenoga prostora te različiti mogući načini automatizacije istoga. Zatim se iznose i opisuju potrebne komponente automatiziranog sustava, te njihov značaj za biljke. Naglasak je na programibilnom logičkom kontroleru i senzorima čiji je rad detaljnije opisan. Za opisane komponente predložen je popis uređaja i senzora dostupnih na tržištu pa je za iste izrađen troškovnik. Također se prikazuje primjer rasporeda i shema spajanja uređaja na skici plastenika. S time se prelazi na upravljački kod, gdje se najprije ukratko opisuju korišteni softveri. Nadalje se detaljno opisuje cijeli upravljački kod i dizajn korisničkoga sučelja. Nakon toga se opisuje laboratorijski postav na kojemu je izvršena simulacije, te se prikazuju rezultati simulacije. Naposljetku iznosi se zaključak cijeloga rada i moguća poboljšanja u sustavu.
Abstract (english)
This paper has presented the software and hardware solution for the automation of a growhouse. In introduction, the importance and function of growhouse and various ways of automating one is presented. It is followed by the description of the required components of automated system, and their imporatance for plants. Accent is on programmable logic controller and sensors whose operating principles are described in detail. For described components a list of commercially available devices and sensors is proposed, and a cost estimate has been made. Moreover, an example of the layout and the device connection scheme is outlined on the dimensional drawing of the considered greenhouse. In the second part of this work, the development of the control program is presented, starting with the software environment used for programming, followed by the actual control code development and the design of the graphical user interface (GUI). This is followed by the description of the laboratory setup which is used for process control simulation, which has been used for actual process simulation within the proposed control framework. Final chapter gives the concluding remarks and possible improvements of systems.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:092297
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-02-22 14:45:29