prikaz prve stranice dokumenta Utjecaj toplinske obrade čelika na njegovu obradivost rezanjem
  Download
PDF 2.96 MB
undergraduate thesis
Utjecaj toplinske obrade čelika na njegovu obradivost rezanjem
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:235:756046
Kukec, Nikola
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Kukec, N. (2022). Utjecaj toplinske obrade čelika na njegovu obradivost rezanjem (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:756046

Kukec, Nikola. "Utjecaj toplinske obrade čelika na njegovu obradivost rezanjem." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:756046

Kukec, Nikola. "Utjecaj toplinske obrade čelika na njegovu obradivost rezanjem." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:756046

Kukec, N. (2022). 'Utjecaj toplinske obrade čelika na njegovu obradivost rezanjem', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 25 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:756046

Kukec N. Utjecaj toplinske obrade čelika na njegovu obradivost rezanjem [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2022 [cited 2024 November 25] Available at: https://urn.nsk.hr/urn:nbn:hr:235:756046

N. Kukec, "Utjecaj toplinske obrade čelika na njegovu obradivost rezanjem", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:235:756046

Metadata
TitleUtjecaj toplinske obrade čelika na njegovu obradivost rezanjem
Title (english)Influence of heat treatment of steels on its machinability properties
AuthorNikola Kukec
MentorBožidar Matijević (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2022-03-02, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Ideja ovog završnog rada bila je istražiti kako toplinska obrada, točnije žarenje utječe na obradivost čelika C60. U radu su detaljno objašnjeni različiti postupci žarenja, posebno sferoidizacijsko žarenje koje se najviše koristi za čelike C60. Nadalje, detaljno je objašnjena obradivost čelika s naglaskom na sile rezanja. Prikazano je kako se sile rezanja mogu analitički izračunati. U sklopu ovog rada napravljen je i eksperiment u kojem je vidljivo kako se te sile mogu eksperimentalno mjeriti. Međutim, veći je naglasak stavljen na dobivanje uvida u razlike u obradivosti niskougljičnog čelika C60, nakon što su uzorci prethodno podvrgnuti različitim toplinskim obradama. Cilj ovog rada je karakterizirati utjecaj provedenih postupaka te donijeti zaključke o njihovim utjecajima u strojnoj obradi.
Abstract (english)
The idea of this final paper was to investigate how heat treatment, more precisely annealing, affects the workability of steel C60. The paper explains in detail various annealing processes, especially spheroidization annealing, which is mostly used for steels C60. Furthermore, the machinability of steel with an emphasis on cutting forces is explained in detail. It is shown how the cutting forces can be calculated analytically. As part of this work, an experiment was made in which it is evident how these forces can be measured experimentally. However, more emphasis has been placed on gaining insight into differences in the machinability of C60 low carbon steel, after the samples have been previously subjected to various heat treatments. The aim of this paper is to characterize the impact of the performed procedures and to draw conclusions about their impacts in machining.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:756046
Study programmeTitle: Mechanical Engineering; specializations in: Design, Process and Energy Engineering, Production Engineering, Engineering Modelling and Computer Simulation, Marine Engineering, Industrial Engineering and Management, Materials Engineering
Course: Production Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-02-24 11:42:31