prikaz prve stranice dokumenta Usporedba rezultata umjeravanja u području malih tlakova do 100 Pa
  Download
PDF 2.65 MB
undergraduate thesis
Usporedba rezultata umjeravanja u području malih tlakova do 100 Pa
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:235:911633
Išek, Mirna
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Išek, M. (2022). Usporedba rezultata umjeravanja u području malih tlakova do 100 Pa (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:911633

Išek, Mirna. "Usporedba rezultata umjeravanja u području malih tlakova do 100 Pa." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:911633

Išek, Mirna. "Usporedba rezultata umjeravanja u području malih tlakova do 100 Pa." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:911633

Išek, M. (2022). 'Usporedba rezultata umjeravanja u području malih tlakova do 100 Pa', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:911633

Išek M. Usporedba rezultata umjeravanja u području malih tlakova do 100 Pa [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2022 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:235:911633

M. Išek, "Usporedba rezultata umjeravanja u području malih tlakova do 100 Pa", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:235:911633

Metadata
TitleUsporedba rezultata umjeravanja u području malih tlakova do 100 Pa
Title (english)Comparison of calibration results in the low pressure range up to 100 Pa
AuthorMirna Išek
MentorLovorka Grgec-Bermanec (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2022-03-03, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Process Energy Engineering
Abstract
U okviru ovog rada provedena je međulaboratorijska usporedba. U usporedbi su sudjelovala tri laboratorija: Laboratorij za procesna mjerenja (LPM) Fakulteta strojarstva i brodogradnje, laboratoriji EkoVent-a i laboratorij Klimaopreme. Opisuje se provedba umjeravanja i konačno usporedba rezultata umjeravanja u području malih tlakova do 100 Pa, a kao umjeravani uređaj koristio se Halstrup Walcher, KAL 200. Prije samog opisa provedenog mjerenja, dan je pregled osnovnih metoda za mjerenje niskih tlakova, te su objašnjeni postupci umjeravanja manometara. Navedene su i detaljno opisane osnovne upute i norme za provođenje međulaboratorijskih usporedbi, od kojih su za ovaj rad i ovo umjeravanje najznačajnije metode (norme) i upute dane od strane DKD-a. Glavna svrha cijelog rada je određivanje vrijednosti faktora slaganja En temeljem kojeg se vršila procjena kvalitete međulaboratorijske usporedbe.
Abstract (english)
An inter-laboratory comparison has been conducted in this paper. Three laboratories participated: the Laboratory for Process Measurements (LPM) of the Faculty of Mechanical Engineering and Naval Architecture, EkoVent Laboratory and Klimaoprema Laboratory. The implementation of calibration and the final comparison of calibration results of small pressures in the range of up to 100 Pa are described, while Halstrup Walcher, KAL 200, was used as a measured device. Before the description of the measurement, basic methods for measuring low pressures are presented, and procedures for calibration of manometers are explained. Basic instructions and norms for conducting inter-laboratory comparisons are described, of which the most important methods (norms) and instructions are given by the DKD. The main purpose of the paper is to determine the value of the agreement factor En, which served as the basis for the estimation of the inter-laboratory comparison.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:911633
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-02-25 07:51:17