prikaz prve stranice dokumenta Određivanje mase utega referentnog etalona sile nazivne vrijednosti 1000 N
  Download
PDF 2.73 MB
undergraduate thesis
Određivanje mase utega referentnog etalona sile nazivne vrijednosti 1000 N
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:235:931737
Josić, Antonijo
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Josić, A. (2022). Određivanje mase utega referentnog etalona sile nazivne vrijednosti 1000 N (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:931737

Josić, Antonijo. "Određivanje mase utega referentnog etalona sile nazivne vrijednosti 1000 N." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:931737

Josić, Antonijo. "Određivanje mase utega referentnog etalona sile nazivne vrijednosti 1000 N." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:931737

Josić, A. (2022). 'Određivanje mase utega referentnog etalona sile nazivne vrijednosti 1000 N', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 11 August 2024, https://urn.nsk.hr/urn:nbn:hr:235:931737

Josić A. Određivanje mase utega referentnog etalona sile nazivne vrijednosti 1000 N [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2022 [cited 2024 August 11] Available at: https://urn.nsk.hr/urn:nbn:hr:235:931737

A. Josić, "Određivanje mase utega referentnog etalona sile nazivne vrijednosti 1000 N", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:235:931737

Metadata
TitleOdređivanje mase utega referentnog etalona sile nazivne vrijednosti 1000 N
Title (english)Determination of the dead weights mass for the reference force standard with the nominal capacity of 1000 N
AuthorAntonijo Josić
MentorŽeljko Alar (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2022-03-02, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Postupak umjeravanja jedan je od osnovnih alata za održavanje mjerne slijedivosti, a time i točnosti i preciznosti uređaja za ispitivanje mehaničkih svojstava. U radu su promatrani rezultati dobiveni prilikom umjeravanja pomoću umjernih utega različitih vrijednosti. U literaturi je prikaz postupaka održavanja mjerne slijedivosti uređaja za mjerenje sile i mase. U eksperimentalnom dijelu provedena je usporedba rezultata težine zadanih utega mjerenih na vagi te pomoću dinamometra. Utezi su potom iskorišteni za umjeravanje dinamometara po mjernim točkama sukladno normi HRN EN ISO 376:2011. Korišteni su dinamometri vrijednosti od 200, 500 i 1000 N kako bi se dobila bolja rezolucija rezultata pri manjim vrijednostima sile. Analizirani su dobiveni rezultati umjeravanja pomoću utega te su dati određeni zaključci.
Abstract (english)
The calibration procedure is one of the basic tools for maintaining the measurement traceability, and thus the accuracy and precision of devices for testing mechanical properties. The paper observes the results obtained during calibration using weights of different values. The literature presents the procedures for maintaining the measurement traceability of devices for measuring force and mass. In the experimental part, a comparison of the results of the given weights measured on a scale and with a force transducer was performed. The weights were then used to calibrate the force transducer at measuring points in accordance with the standard HRN EN ISO 376: 2011. 200, 500 and 1000 N force transducers were used to obtain better resolution results at lower force values. The obtained results of weight calibration were analyzed and certain conclusions were given.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:931737
Study programmeTitle: Mechanical Engineering; specializations in: Design, Process and Energy Engineering, Production Engineering, Engineering Modelling and Computer Simulation, Marine Engineering, Industrial Engineering and Management, Materials Engineering
Course: Materials Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-02-28 14:11:40