prikaz prve stranice dokumenta Projektiranje eksperimentalnog postava za analizu hidrauličkih sustava u otvorenom krugu
  Download
PDF 2.33 MB
master's thesis
Projektiranje eksperimentalnog postava za analizu hidrauličkih sustava u otvorenom krugu
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:235:429479
Semren, Dominik
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Semren, D. (2022). Projektiranje eksperimentalnog postava za analizu hidrauličkih sustava u otvorenom krugu (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:429479

Semren, Dominik. "Projektiranje eksperimentalnog postava za analizu hidrauličkih sustava u otvorenom krugu." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:429479

Semren, Dominik. "Projektiranje eksperimentalnog postava za analizu hidrauličkih sustava u otvorenom krugu." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:429479

Semren, D. (2022). 'Projektiranje eksperimentalnog postava za analizu hidrauličkih sustava u otvorenom krugu', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:429479

Semren D. Projektiranje eksperimentalnog postava za analizu hidrauličkih sustava u otvorenom krugu [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2022 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:235:429479

D. Semren, "Projektiranje eksperimentalnog postava za analizu hidrauličkih sustava u otvorenom krugu", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:235:429479

Metadata
TitleProjektiranje eksperimentalnog postava za analizu hidrauličkih sustava u otvorenom krugu
Title (english)Design of an experimental setup for the analysis of hydraulic systems in an open circuit
AuthorDominik Semren
MentorŽeljko Šitum (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2022-07-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovoga rada je projektiranje eksperimentalnog postava za analizu hidrauličkih sustava u otvorenom krugu. Proces projektiranja eksperimentalnog postava uključuje postupak proračuna komponenti sustava. Nakon proračuna komponenti sustava, provoden je izbor komponenti otvorenog hidrauličkog kruga. Uz izabrane komponente dane su i tehničke specifikacije proizvođača. Projektirani sustav modeliran je u software-u CatiaV5 te je dan shematski prikaz uz objašnjenja rada pojedinih sekcija sustava, s naglaskom na PVG32 ventilski blok, koji je jedna od glavnih komponenti ovoga sustava. Na kraju je opisan proces nadogradnje sustava mjernim i upravljačkim komponentama s ciljem dobivanja eksperimentalnog postava, kojim će se moći simulirati opterećenje cilindara te analizirati pojave na komponentama otvorenog hidrauličkog kruga.
Abstract (english)
The subject of this thesis is the design of an experimental setup for the analysis of hydraulic systems in an open circuits. The process of designing the experimental setup includes the calculation process of system components. After the system components calculation process, the selection of the components was carried out. Along with the selected components, technical specifications from manufacturer were given. The designed system was modelled in CatiaV5 software and schematic representation was given with explanation of individual sections working principle, with an emphasis on the PVG32 valve block, which is one of the main components of this system. At the end, the process of upgrading the system with measuring and control components was described. The aim of the process of upgrading the system is to obtain experimental setup that will be used for simulation of load on cylinders and for analysis of the phenomena on the components of the open hydraulic circuit.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:429479
Study programmeTitle: Mechanical Engineering; specializations in: Design, Process and Energy Engineering, Production Engineering, Engineering Modelling and Computer Simulation, Marine Engineering, Industrial Engineering and Management, Materials Engineering, Mechatronics and Robotics, Autonomous Systems
Course: Mechatronics and Robotics
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-07-07 08:15:35