prikaz prve stranice dokumenta Utjecaj toplinske obrade na mehanička svojstva aluminijeve legure
  Download
PDF 2.86 MB
master's thesis
Utjecaj toplinske obrade na mehanička svojstva aluminijeve legure
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:235:276939
Živoder, Matija
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Živoder, M. (2022). Utjecaj toplinske obrade na mehanička svojstva aluminijeve legure (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:276939

Živoder, Matija. "Utjecaj toplinske obrade na mehanička svojstva aluminijeve legure." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:276939

Živoder, Matija. "Utjecaj toplinske obrade na mehanička svojstva aluminijeve legure." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:276939

Živoder, M. (2022). 'Utjecaj toplinske obrade na mehanička svojstva aluminijeve legure', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 12 August 2024, https://urn.nsk.hr/urn:nbn:hr:235:276939

Živoder M. Utjecaj toplinske obrade na mehanička svojstva aluminijeve legure [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2022 [cited 2024 August 12] Available at: https://urn.nsk.hr/urn:nbn:hr:235:276939

M. Živoder, "Utjecaj toplinske obrade na mehanička svojstva aluminijeve legure", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:235:276939

Metadata
TitleUtjecaj toplinske obrade na mehanička svojstva aluminijeve legure
Title (english)Influence of heat treatment on Aluminium alloys mechanical properties
AuthorMatija Živoder
MentorŽeljko Alar (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2022-07-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Aluminij je jedan od najzastupljenijih metala u polju strojarstva koji osim niske gustoće i visoke korozijske postojanosti ima značajna svojstva električne i toplinske vodljivosti. Problem sirovog aluminija leži u vidu niskih vrijednosti čvrstoće i tvrdoće, mehaničkih svojstava koje su presudne prilikom izrada konstrukcijskih i strojnih dijelova. Kombinacijom legiranja te različitim parametrima toplinske obrade moguće je povećati otpornost i deformabilnost aluminija. U radu su opisana svojstva aluminij i aluminijevih legura, s posebnim naglaskom na toplinsko obradive legure, te pregled postupaka ispitivanja mehaničkih svojstava. U eksperimentalnom dijelu provedena je analiza uzoraka aluminijeve legure u polaznom stanju, te nakon dvije kombinacije toplinske obrade gdje su praćene promjene mehaničkih svojstava i mikrostrukture. Komentirani su rezultati te su doneseni određeni zaključci.
Abstract (english)
Aluminum is one of the most common metals in the field of mechanical engineering, which, in addition to its low density and high corrosion resistance, has significant properties of electrical and thermal conductivity. The problem of raw aluminum lies in its low values of strength and hardness, mechanical properties that are crucial when making structural and machine parts. By combining alloying and different heat treatment parameters, it is possible to increase the resistance and deformability of aluminum. The paper describes the properties of aluminum and aluminum alloys, with a special emphasis on heat-treatable alloys, and an overview of the mechanical properties testing procedures. In the experimental part, an analysis of the aluminum alloy samples was carried out in the initial state, and after two combinations of heat treatment, where changes in mechanical properties and microstructure were monitored. The results were analyzed and certain conclusions were made.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:276939
Study programmeTitle: Mechanical Engineering; specializations in: Design, Process and Energy Engineering, Production Engineering, Engineering Modelling and Computer Simulation, Marine Engineering, Industrial Engineering and Management, Materials Engineering, Mechatronics and Robotics, Autonomous Systems
Course: Materials Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-07-07 08:44:56