prikaz prve stranice dokumenta Utjecaj usmjerenosti strukture na tvrdoću i abrazijsku otpornost drva masline
  Download
PDF 2.85 MB
master's thesis
Utjecaj usmjerenosti strukture na tvrdoću i abrazijsku otpornost drva masline
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:235:609186
Klanac, Josip
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Klanac, J. (2022). Utjecaj usmjerenosti strukture na tvrdoću i abrazijsku otpornost drva masline (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:609186

Klanac, Josip. "Utjecaj usmjerenosti strukture na tvrdoću i abrazijsku otpornost drva masline." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:609186

Klanac, Josip. "Utjecaj usmjerenosti strukture na tvrdoću i abrazijsku otpornost drva masline." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:609186

Klanac, J. (2022). 'Utjecaj usmjerenosti strukture na tvrdoću i abrazijsku otpornost drva masline', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:609186

Klanac J. Utjecaj usmjerenosti strukture na tvrdoću i abrazijsku otpornost drva masline [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2022 [cited 2024 December 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:609186

J. Klanac, "Utjecaj usmjerenosti strukture na tvrdoću i abrazijsku otpornost drva masline", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:235:609186

Metadata
TitleUtjecaj usmjerenosti strukture na tvrdoću i abrazijsku otpornost drva masline
Title (english)Influence of structure orientation on hardness and abrasion resistance of the olive wood
AuthorJosip Klanac
MentorVera Rede (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2022-07-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj ovog rada bio je odrediti kako usmjerenost strukture utječe na tvrdoću i gubitak volumena pri abrazijskom trošenju drva masline (lat. Olea europea). Ispitivanje trošenja na abraziju provedeno je metodom „suhi pijesak – gumeni kotač“, a tvrdoća je mjerena Brinellovom metodom. U radu je utvrđeno kako postoji vrlo niska linearna korelacija između usmjerenosti strukture i vrijednosti tvrdoće te gubitka volumena pri abraziji. Porastom kuta između abradirane površine i tangente na god, odnosno postupnim prelaskom iz tangencijalnog u radijalni presjek, blago se povećava gubitak volumena pri abraziji te blago pada tvrdoća. Između tvrdoće i gustoće postoji značajna pozitivna linearna korelacija dok je između gubitka volumena pri abraziji i gustoće linearna korelacija vrlo slaba i pozitivna. Između tvrdoće i gubitka volumena pri abraziji postoji vrlo slaba negativna linearna korelacija. Vrijednosti i rasipanja rezultata statistički su analizirani pomoću Weibullove razdiobe te je utvrđeno da se vrijednosti za gustoću, gubitak volumena pri abrazijskom trošenju i tvrdoću ponašaju u skladu s razdiobom.
Abstract (english)
The aim of this work was to determine how the orientation of the structure affects the hardness and loss of volume during abrasive wear of olive wood (lat. Olea europea). Abrasion wear testing was performed using the "dry sand - rubber wheel" method, and hardness was measured using the Brinell method. The paper found that there is a very low linear correlation between the directionality of the structure and the value of hardness and volume loss during abrasion. With the increase in the angle between the abraded surface and the tangent to the tree ring, i.e. with the gradual transition from the tangential to the radial section, the loss of volume during abrasion increases slightly and the hardness decreases slightly. There is a significant positive linear correlation between hardness and density, while between volume loss during abrasion and density, the linear correlation is very weak and positive. There is a very weak negative linear correlation between hardness and volume loss during abrasion. The values and dispersion of the results were statistically analyzed using the Weibull distribution, and it was determined that the values for density, volume loss during abrasive wear and hardness behave in accordance with the distribution.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:609186
Study programmeTitle: Mechanical Engineering; specializations in: Design, Process and Energy Engineering, Production Engineering, Engineering Modelling and Computer Simulation, Marine Engineering, Industrial Engineering and Management, Materials Engineering, Mechatronics and Robotics, Autonomous Systems
Course: Materials Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-07-08 14:46:59