prikaz prve stranice dokumenta Razvoj programske podrške za ispitni postav zračnog tunela
  Download
PDF 3.12 MB
master's thesis
Razvoj programske podrške za ispitni postav zračnog tunela
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:235:117049
Zorić, Vito
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Zorić, V. (2022). Razvoj programske podrške za ispitni postav zračnog tunela (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:117049

Zorić, Vito. "Razvoj programske podrške za ispitni postav zračnog tunela." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:117049

Zorić, Vito. "Razvoj programske podrške za ispitni postav zračnog tunela." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:117049

Zorić, V. (2022). 'Razvoj programske podrške za ispitni postav zračnog tunela', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 13 July 2024, https://urn.nsk.hr/urn:nbn:hr:235:117049

Zorić V. Razvoj programske podrške za ispitni postav zračnog tunela [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2022 [cited 2024 July 13] Available at: https://urn.nsk.hr/urn:nbn:hr:235:117049

V. Zorić, "Razvoj programske podrške za ispitni postav zračnog tunela", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:235:117049

Metadata
TitleRazvoj programske podrške za ispitni postav zračnog tunela
Title (english)Development of wind tunnel control system support software
AuthorVito Zorić
MentorTomislav Staroveški (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2022-07-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U sklopu diplomskog rada, proveden je projekt revitalizacije postojećeg zračnog tunela. Naglasak je stavljen na razvoj grafičkog korisničkog sučelja kojim će se omogućiti upravljanje ispitnim postavom, čija je zadaća precizno orijentiranje modela letjelice unutar mjerne sekcije zračnog tunela. U sklopu ispitnog postava ugrađen je dinamometar pomoću kojeg se dobivaju izmjerene komponente opterećenja na modelu letjelice uslijed djelovanja strujanja zraka. Grafičko korisničko sučelje koristit će se i za prikaz te pohranjivanje komponenti opterećenja. Upravljački sustav otvorene arhitekture LinuxCNC koristi se za realiziciju grafičkog korisničkog sučelja te za ostvarivanje rotacijskih gibanja.
Abstract (english)
In this thesis, a revitalization project of the existing air tunnel was carried out. The focus was on the development of the graphical user interface which will enable the control of the testbed, whose task is the accurately orienting aircraft model within the measuring section of the air tunnel. A dynamometer shall be installed as part of the testbed, which is used to obtain load data on the aircraft model. The graphical user interface will be also used for display and storage of the loads components. The LinuxCNC open architecture contol system is used to implement the graphical user interface and to realize rotary motions.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:117049
Study programmeTitle: Mechanical Engineering; specializations in: Design, Process and Energy Engineering, Production Engineering, Engineering Modelling and Computer Simulation, Marine Engineering, Industrial Engineering and Management, Materials Engineering, Mechatronics and Robotics, Autonomous Systems
Course: Production Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2022-07-12 09:31:48