prikaz prve stranice dokumenta Centrifugalno lijevanje cijevi od nehrđajućeg čelika
Embargo period 2027-07-13
master's thesis
Centrifugalno lijevanje cijevi od nehrđajućeg čelika
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:235:193497
Sivrić, Lucija
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Sivrić, L. (2022). Centrifugalno lijevanje cijevi od nehrđajućeg čelika (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:193497

Sivrić, Lucija. "Centrifugalno lijevanje cijevi od nehrđajućeg čelika." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:193497

Sivrić, Lucija. "Centrifugalno lijevanje cijevi od nehrđajućeg čelika." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:193497

Sivrić, L. (2022). 'Centrifugalno lijevanje cijevi od nehrđajućeg čelika', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 04 September 2024, https://urn.nsk.hr/urn:nbn:hr:235:193497

Sivrić L. Centrifugalno lijevanje cijevi od nehrđajućeg čelika [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2022 [cited 2024 September 04] Available at: https://urn.nsk.hr/urn:nbn:hr:235:193497

L. Sivrić, "Centrifugalno lijevanje cijevi od nehrđajućeg čelika", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:235:193497

Metadata
TitleCentrifugalno lijevanje cijevi od nehrđajućeg čelika
Title (english)Centrifugal casting of stainless steel tube
AuthorLucija Sivrić
MentorBranko Bauer (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2022-07-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Predmet razmatranja rada je tehnologija centrifugalnog vertikalnog lijevanja, razvoj centrifugalnog vertikalnog lijevanja kroz povijest. U radu je navedena problematika vertikalnog centrifugalnog lijevanja, tehnološki postupak lijevanja te prednosti i nedostaci lijevanja. Detaljnije je opisan tehnološki postupak lijevanja, uključujući pripremanje kalupa, lijevanje, hlađenje te vađenje odljevka. Napravljen je kratki osvrt o skrućivanju materijala nakon lijevanja što je jedna od najvažnijih pojava pri izradi proizvoda lijevanjem. Opisane su računalne simulacije kao naophodan alat u industriji i proizvodnji. Eksperimentalni dio temelji se na simulaciji lijevanja nehrđajućeg čelika EN 1.4301 izvedenoj u programu ProCAST nakon čega su analizirani rezultati računalne simulacije. Rezultati simulacije su uspoređeni sa stvarnim stanjem odljevka odlivenim u Laboratoriju za ljevarstvo na Fakultetu strojarstva i brodogradnje. Napravljena je mikrostrukturna analiza odljevka. Rezultati simulacije podudaraju se sa rezultatima stvarnog lijevanja.
Abstract (english)
The subject of this paper is the technology of vertical centrifugal casting and the development of vertical centrifugal casting throughout history. The thesis presents the problems of vertical centrifugal casting, technological casting process and advantages and disadvantages of casting. The technological process of casting is described in more detail, including mold preparation, pouring, cooling and casting removal. A brief review was made of the solidification of the material after pouring, which is one of the most important phenomena in the manufacture of products by casting. Computer simulations are described as a necessary tool in industry and production. The experimental part is based on the simulation of stainless steel EN 1.4301 casting performed in the software ProCAST. The results of computer simulation were analyzed. The simulation results were compared with the actual condition of the casting cast in the Foundry Laboratory at the Faculty of Mechanical Engineering and Naval Architecture. A microstructural analysis of the casting was performed. The simulation results match the actual casting results.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:193497
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsEmbargoed access
Embargo expiration date: 2027-07-13
Terms of useLicence In copyright icon
Created on2022-07-13 09:02:42