prikaz prve stranice dokumenta Primjena digitalizatora u određivanju ponovljivosti stezanja obratka
  Download
PDF 2.65 MB
undergraduate thesis
Primjena digitalizatora u određivanju ponovljivosti stezanja obratka
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:235:236728
Repalust, Luka
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Repalust, L. (2022). Primjena digitalizatora u određivanju ponovljivosti stezanja obratka (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:236728

Repalust, Luka. "Primjena digitalizatora u određivanju ponovljivosti stezanja obratka." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:236728

Repalust, Luka. "Primjena digitalizatora u određivanju ponovljivosti stezanja obratka." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:236728

Repalust, L. (2022). 'Primjena digitalizatora u određivanju ponovljivosti stezanja obratka', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 18 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:236728

Repalust L. Primjena digitalizatora u određivanju ponovljivosti stezanja obratka [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2022 [cited 2024 December 18] Available at: https://urn.nsk.hr/urn:nbn:hr:235:236728

L. Repalust, "Primjena digitalizatora u određivanju ponovljivosti stezanja obratka", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:235:236728

Metadata
TitlePrimjena digitalizatora u određivanju ponovljivosti stezanja obratka
Title (english)Analysis of workpiece clamping repeatability using 3D scanner
AuthorLuka Repalust
MentorTomislav Staroveški (mentor)
MentorMiho Klaić (komentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2022-09-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Tema ovog završnog rada je primjena digitalizatora u određivanju ponovljivosti stezanja obratka. U teorijskom dijelu završnog rada prikazane su teorijske osnove i primjena 3D skeniranja. Nabrojene su metode 3D skeniranja te je opisan njihov princip rada te prednosti i nedostaci. Na kraju teorijskog dijela završnog rada opisan je mjerni sustav ATOS 5X. U eksperimentalnom dijelu završnog rada opisan je postupak pripreme stezne naprave i ispitnog uzorka za skeniranje. Objašnjeni su postupci tijekom kalibracije, digitalizacije uzorka te poligonizacije. Na kraju su prikazani rezultati mjerenja i analizirana odstupanja skeniranih ispitnih uzoraka u softveru GOM Inspect.
Abstract (english)
The subject of this undergraduate thesis is an analysis of workpiece clamping repeatability using the 3D scanner. The theoretical part of this undergraduate thesis describes the theoretical foundations and applications of 3D scanning technologies. Types of 3D scanning methods are listed together with their working process, advantages, and disadvantages. At the end of the theoretical part of the thesis, the ATOS 5X measurement system is explained. In the experimental part, preparation for 3D scanning of a clamping tool and a workpiece is explained. The calibration, 3D scanning, and polygonization processes are also explained. Measurement results and deviation analysis of the workpiece in the software GOM Inspect are presented at the end of the thesis.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:236728
Study programmeTitle: Mechanical Engineering; specializations in: Design, Process and Energy Engineering, Production Engineering, Engineering Modelling and Computer Simulation, Marine Engineering, Industrial Engineering and Management, Materials Engineering
Course: Production Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-09-21 10:23:31