prikaz prve stranice dokumenta Stropni mosni granik
  Download
PDF 18.22 MB
undergraduate thesis
Stropni mosni granik
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:235:899261
Buj, Marko
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Buj, M. (2022). Stropni mosni granik (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:899261

Buj, Marko. "Stropni mosni granik." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:899261

Buj, Marko. "Stropni mosni granik." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:899261

Buj, M. (2022). 'Stropni mosni granik', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 04 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:899261

Buj M. Stropni mosni granik [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2022 [cited 2024 November 04] Available at: https://urn.nsk.hr/urn:nbn:hr:235:899261

M. Buj, "Stropni mosni granik", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:235:899261

Metadata
TitleStropni mosni granik
Title (english)Ceiling bridge crane
AuthorMarko Buj
MentorMatija Hoić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2022-09-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu bilo je potrebno konstruirati stropni mosni granik. Cilj je bio nosivu konstrukciju granika izvesti tako da se vozna staza granika ovjesi na strop kako bi se omogućila što veća visina dizanja unutar zadane visine prostorije. Nakon uvodnog razmatranja o mosnim granicima, analizirano je nekoliko postojećeih rješenja na temelju kojih se onda sastavilo nekoliko koncepcijskih rješenja. Razmatranjem zadanih projektnih zahtjeva odabralo se optimalno rješenje, s kojim se išlo u daljnju razradu. Pošto prijenosni omjer nije zadan u zadatku, putem orijentacijskog proračuna došlo se do zaključka kako je za izradu ovakovog mosnog granika najbolje ići sa što manjim prijenosnim omjerom, a ključan podatak za donošenje takve odluke bila je spoznaja o minimalnoj dopuštenoj udaljenosti sklopa kuke od sklopa bubnja. Nadalje pristupilo se proračunu svih ključnih dijelova mosnog granika,odabriu odgovarajućih standardnih komponenti i pogonskih strojeva.Zaključno je izrađena potrebna tehnička dokumentacija u programskom paketu PTC Creo.
Abstract (english)
In this final thesis, it was needed to construct a ceiling bridge crane. The goal was to carry out the load-bearing structure of the bridge crane so that the track of the crane is suspended from the ceiling in order to enable the highest possible lifting height within the given height of the room. After the preliminary consideration of bridge cranes, several existing solutions were analyzed, on the basis of which several conceptual solutions were compiled. By considering the given project requirements, the optimal solution was chosen, which was used for further elaboration. Since the transmission ratio is not given in the task, through the orientational calculation, we came to the conclusion that it is best to go with the smallest possible transmission ratio for making this kind of bridge crane, and the key information for making such a decision was the knowledge of the minimum distance from the hook assembly to the drum assembly. Furthermore, the calculation of all key parts of the bridge crane was started,all of the standard components and prime movers were chosen. In conclusion, the necessary technical documentation was created in the PTC Creo software package.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:899261
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-09-23 09:32:49