prikaz prve stranice dokumenta Stroj za namatanje izolacijskih kapa transformatora
  Download
PDF 8.55 MB
master's thesis
Stroj za namatanje izolacijskih kapa transformatora
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. urn:nbn:hr:235:221551
Grgić, Domagoj
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Grgić, D. (2019). Stroj za namatanje izolacijskih kapa transformatora (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:221551

Grgić, Domagoj. "Stroj za namatanje izolacijskih kapa transformatora." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:221551

Grgić, Domagoj. "Stroj za namatanje izolacijskih kapa transformatora." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2019. https://urn.nsk.hr/urn:nbn:hr:235:221551

Grgić, D. (2019). 'Stroj za namatanje izolacijskih kapa transformatora', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 13 July 2024, https://urn.nsk.hr/urn:nbn:hr:235:221551

Grgić D. Stroj za namatanje izolacijskih kapa transformatora [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2019 [cited 2024 July 13] Available at: https://urn.nsk.hr/urn:nbn:hr:235:221551

D. Grgić, "Stroj za namatanje izolacijskih kapa transformatora", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:235:221551

Metadata
TitleStroj za namatanje izolacijskih kapa transformatora
Title (english)Machine for winding paper insulation on angle rings
AuthorDomagoj Grgić
MentorStanko Škec (mentor)
Committee memberNeven Pavković (predsjednik povjerenstva)
Committee memberZdenka Keran (član povjerenstva)
Committee memberStanko Škec (član povjerenstva)
Committee memberZvonko Herold (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2019-01-25, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Tema ovog diplomskog rada je razvoj stroja za namatanje izolacijskih kapa transformatora za tvrtku Končar D&ST. Zbog zastarjelog starog stroja koji je obavljao tu funkciju, potrebno je osmisliti novo rješenje koje bi u potpunosti zamijenilo postojeće. Uvodni dio započinje općenitim dijelom o transformatorima, izolaciji transformatora i kapama kao dijelovima izolacije. Nakon toga se opisuje postojeći stroj kako bi se stekao uvid u karakteristike i poteškoće na koje se nailazi. Zatim se istražuje tržište kako bi se pronašla slična rješenja ili rješenja slična za pojedine funkcije koje stroj mora ispunjavati. Funkcijska dekompozicija i morfološka matrica su napravljene nakon toga kako bi se spoznale sve funkcije koje uređaj mora imati i potencijalna rješenja tih funkcija. To je omogućilo izrađivanje koncepata koji su se evaluirali i nakon toga je odabran jedan koncept s kojim se krenulo u konstrukcijsku razradu. Kroz konstrukcijsku razradu napravljen je kontrolni proračun nekih dijelova prema kojima se izradio model uređaja. Sve je završeno izradom tehničke dokumentacije za ovaj stroj.
Abstract (english)
The subject of this diploma thesis is development of transformer angle caps (rings) winding machine for company Končar D&ST. Current machine is outdated so there is a need for a new solution which would completely change current machine. This diploma thesis starts with explaining of transformers, transformer insulation and angle caps as parts of the transformer insulation. After that, current machine is described in detail to find out what characteristics should new machine have and what are the diffiuculties. Then it was necessary to research the market to see if there is any similar machines or machines which would solve some functions. After that, functional decomposition and morfological chart was made so that is possible to see every function machine should have and possible solutions for this functions. After all of that, it was possible to start with generation of multiple concepts which were evaluated. One concept was chosen for design process in which control analysis and production of technical documentation was made.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:221551
Study programmeTitle: Mechanical Engineering; specializations in: Design, Process and Energy Engineering, Production Engineering, Engineering Modelling and Computer Simulation, Marine Engineering, Industrial Engineering and Management, Materials Engineering, Mechatronics and Robotics, Autonomous Systems
Course: Design
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-10-10 06:25:19