prikaz prve stranice dokumenta Mikrostruktura i mehanička svojstva lijevane i 3D ispisane legure AlSi10Mg
  Download
PDF 5.46 MB
master's thesis
Mikrostruktura i mehanička svojstva lijevane i 3D ispisane legure AlSi10Mg
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:235:884439
Poljak, Ivan
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Poljak, I. (2022). Mikrostruktura i mehanička svojstva lijevane i 3D ispisane legure AlSi10Mg (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:884439

Poljak, Ivan. "Mikrostruktura i mehanička svojstva lijevane i 3D ispisane legure AlSi10Mg." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:884439

Poljak, Ivan. "Mikrostruktura i mehanička svojstva lijevane i 3D ispisane legure AlSi10Mg." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:884439

Poljak, I. (2022). 'Mikrostruktura i mehanička svojstva lijevane i 3D ispisane legure AlSi10Mg', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:884439

Poljak I. Mikrostruktura i mehanička svojstva lijevane i 3D ispisane legure AlSi10Mg [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2022 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:235:884439

I. Poljak, "Mikrostruktura i mehanička svojstva lijevane i 3D ispisane legure AlSi10Mg", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:235:884439

Metadata
TitleMikrostruktura i mehanička svojstva lijevane i 3D ispisane legure AlSi10Mg
Title (english)Microstructure and mechanical properties of cast and 3D printed AlSi10Mg alloy
AuthorIvan Poljak
MentorBranko Bauer (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2022-12-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Ovaj diplomski rad je podijeljen na dva dijela, teorijski i eksperimentalni. U teorijskom dijelu diplomskog rada, navedene su vrste ljevačkih postupaka te karakteristike istih. Nadalje je obrađen aluminij te aluminijske legure, svojstva legura te je postavljen naglasak na gravitacijsko lijevanje aluminijskih legura u trajne kalupe. Pošto se proizvode sve kompleksniji strojni elementi, danas se postupci aditivne proizvodnje sve više koriste. U diplomskom radu obrađene su tehnologije aditivne proizvodnje. U diplomskom radu je obrađena proizvodnja AlSi10Mg dijelova uz pomoć tehnologije selektivnog laserskog taljenja, SLM. U eksperimentalnom dijelu rada provedeno je ispitivanje mikrostrukture i vlačnih svojstava lijevanih uzoraka i 3D ispisanih uzoraka SLM postupkom koji su obrađeni nekim od postupaka toplinske obrade.
Abstract (english)
This thesis is divided into two parts, theoretical and experimental. In the theoretical part of the master thesis, the types of casting processes and their characteristics are listed. Furthermore, aluminum and aluminum alloys properties of alloys were discussed. Emphasis was placed on the gravity casting of aluminum alloys in permanent molds. Since machine parts with more and more complex geometries are produced, additive manufacturing processes are used more and more today. The thesis deals with the production of AlSi10Mg parts with the help of selective laser melting (SLM) technology. In the experimental part of the thesis, testing of the microstructure and tensile properties of cast samples and SLM-printed and heat treated samples was carried out.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:884439
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-11-30 16:32:05