prikaz prve stranice dokumenta Razvoj kirurške vodilice po mjeri pacijenta s mikrognatijom s pomoću aditivne proizvodnje
  Download
PDF 3.66 MB
master's thesis
Razvoj kirurške vodilice po mjeri pacijenta s mikrognatijom s pomoću aditivne proizvodnje
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:235:697877
Zoretić, Dominik
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Zoretić, D. (2022). Razvoj kirurške vodilice po mjeri pacijenta s mikrognatijom s pomoću aditivne proizvodnje (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:697877

Zoretić, Dominik. "Razvoj kirurške vodilice po mjeri pacijenta s mikrognatijom s pomoću aditivne proizvodnje." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:697877

Zoretić, Dominik. "Razvoj kirurške vodilice po mjeri pacijenta s mikrognatijom s pomoću aditivne proizvodnje." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:697877

Zoretić, D. (2022). 'Razvoj kirurške vodilice po mjeri pacijenta s mikrognatijom s pomoću aditivne proizvodnje', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 17 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:697877

Zoretić D. Razvoj kirurške vodilice po mjeri pacijenta s mikrognatijom s pomoću aditivne proizvodnje [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2022 [cited 2024 November 17] Available at: https://urn.nsk.hr/urn:nbn:hr:235:697877

D. Zoretić, "Razvoj kirurške vodilice po mjeri pacijenta s mikrognatijom s pomoću aditivne proizvodnje", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:235:697877

Metadata
TitleRazvoj kirurške vodilice po mjeri pacijenta s mikrognatijom s pomoću aditivne proizvodnje
Title (english)Development of patient-tailored surgical guide for the patient with micrognathia by aid of additive manufacturing
AuthorDominik Zoretić
MentorDamir Godec (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2022-12-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Primjena aditivnih tehnologija u medicini sve je veća, no ista je regulirana je nizom pravila i normi. Izrada implantata i kirurških pomagala pomoću tehnologija aditivne proizvodnje iz dana u dan sve više raste. Aditivna proizvodnja omogućuje individualnu proizvodnju bez signifikantnog povećanja troškova i produljenja vremena proizvodnje. Osim za istraživanja i razvoj te za prekliničke analize i ispitivanja poput modela za pripremu kompleksnog operativnog zahvata aditivna tehnologija se primjenjuje i u izradi medicinskih pomagala kao što su implantati, proteze, kirurške vodilice. Također, u posljednjih nekoliko godina ova tehnologija sudjeluje i u proizvodnji bio-tkiva (bio-ispis) U ovom radu opisana je procedura izrade prototipa kirurške vodilice po mjeri pacijenta s mikrognatijom primjenjujući aditivnu proizvodnju te sve njene norme i standarde.
Abstract (english)
The use of additive technologies in medicine is increasing, but it is regulated by a series of rules and norms. The production of implants and surgical aids using additive manufacturing technologies is growing day by day. Additive production enables individual production without significantly increasing costs and prolonging production time. In addition to research and development and for preclinical analyzes and tests such as models for the preparation of a complex surgical procedure, additive technology is also used in the production of medical aids such as implants, prostheses, surgical guides. Also, in the last few years, this technology has been involved in the production of bio-tissue (bio-printing). This paper describes the procedure of making a prototype of a surgical guide made to measure for a patient with micrognathia using additive manufacturing and all its norms and standards.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:697877
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-12-01 09:25:44