prikaz prve stranice dokumenta Utjecaj orijentacije odljevka u kalupu na pojavu poroznosti skupljanja
  Download
PDF 5.65 MB
master's thesis
Utjecaj orijentacije odljevka u kalupu na pojavu poroznosti skupljanja
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:235:020900
Zovko, Ivan
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Zovko, I. (2022). Utjecaj orijentacije odljevka u kalupu na pojavu poroznosti skupljanja (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:020900

Zovko, Ivan. "Utjecaj orijentacije odljevka u kalupu na pojavu poroznosti skupljanja." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:020900

Zovko, Ivan. "Utjecaj orijentacije odljevka u kalupu na pojavu poroznosti skupljanja." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:235:020900

Zovko, I. (2022). 'Utjecaj orijentacije odljevka u kalupu na pojavu poroznosti skupljanja', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 21 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:020900

Zovko I. Utjecaj orijentacije odljevka u kalupu na pojavu poroznosti skupljanja [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2022 [cited 2024 December 21] Available at: https://urn.nsk.hr/urn:nbn:hr:235:020900

I. Zovko, "Utjecaj orijentacije odljevka u kalupu na pojavu poroznosti skupljanja", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:235:020900

Metadata
TitleUtjecaj orijentacije odljevka u kalupu na pojavu poroznosti skupljanja
Title (english)Influence of the casting orientation in the mould on the occurrence of shrinkage porosity
AuthorIvan Zovko
MentorBranko Bauer (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2022-12-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U teorijskom dijelu rada opisane su tehnologije lijevanja aluminijskih legura. U prvom je dijelu opisana legura AlSi12 i utjecaj legirnih elemenata na svojstva aluminijskih legura. Također, navedene su i eventualne greške u odljevcima koje se mogu pojaviti prilikom lijevanja. U eksperimentalnom dijelu rada istraživan je utjecaj orijentacije odljevka u kalupu na pojavu poroznosti skupljanja. Za odabrani su odljevak proračunate i konstruirane dvije varijante horizontalnog i dvije varijante vertikalnog uljevnog sustava. Simulacija lijevanja provedena je u programskom paketu ProCAST, a analizom su iste dana konstrukcijska poboljšanja. Lijevanje odljevaka provedeno je u Laboratoriju za ljevarstvo Fakulteta strojarstva i brodogradnje Sveučilišta u Zagrebu. Odljevci su nakon hlađenja i skrućivanja ispitani radiografskom metodom. Rezultati ispitivanja radiografskom metodom uspoređeni su s rezultatima simulacije. Snimljeni su radiogrami ukazali na pojavu plinske poroznosti i poroznosti skupljanja u svim odljevcima. Najbolja se pokazala varijanta lijevanja s direktnim vertikalnim uljevnim sustavom.
Abstract (english)
In the theoretical part of the thesis, casting technologies for aluminium alloys were described. In the first part, the alloy AlSi12 and the influence of alloying elements on the properties of aluminium alloys were described. In addition, possible defects in castings that may occur during casting were listed. In the experimental part of the work, the influence of the casting orientation in the mould on the occurrence of shrinkage porosity was investigated. Two variants of the horizontal and two variants of the vertical gating system were calculated and designed for the selected casting. The casting simulation was performed using the ProCAST software package and design improvements were indicated. Casting was carried out in the Foundry Laboratory of the Faculty of Mechanical Engineering and Naval Architecture of the University of Zagreb. After cooling and solidification, the castings were examined using radiographic testing. The results of the radiographic test were compared with the simulation results. The recorded radiographs showed the occurrence of gas porosity and shrinkage porosity in all castings. The direct vertical casting method produced the best casting.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:020900
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-12-13 18:28:23