prikaz prve stranice dokumenta Konzolna dizalica s voznim vitlom
  Download
PDF 3.09 MB
undergraduate thesis
Konzolna dizalica s voznim vitlom
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:739015
Bulović, Iva
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Bulović, I. (2023). Konzolna dizalica s voznim vitlom (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:739015

Bulović, Iva. "Konzolna dizalica s voznim vitlom." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:739015

Bulović, Iva. "Konzolna dizalica s voznim vitlom." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:739015

Bulović, I. (2023). 'Konzolna dizalica s voznim vitlom', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 04 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:739015

Bulović I. Konzolna dizalica s voznim vitlom [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2024 November 04] Available at: https://urn.nsk.hr/urn:nbn:hr:235:739015

I. Bulović, "Konzolna dizalica s voznim vitlom", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:739015

Metadata
TitleKonzolna dizalica s voznim vitlom
Title (english)Cantilever crane with traveling winch
AuthorIva Bulović
MentorMatija Hoić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2023-03-01, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
Tema ovog završnog rada je koncipirati i konstruirati konzolni granik za poslove održavanja pogonskih uređaja čeličnih konstrukcija i uređaja vrlo velike nosivosti. Granik mora biti moguće rastaviti, sastaviti, ručno prenositi te mora biti omogućeno oslanjanje na unaprijed pripremljene prirubnice na konstrukciji na kojoj se vrše radovi. Kako bi se omogućilo sastavljanje, rastavljanje i prenošenje, svaki podsustav granika ne smije imati više od 50 kg. Granik se sastoji se od vitla s lancem i elektromotorom, promjena dohvata, tj. vožnja po dohvatniku i rotacija ostvaruju se ručnim pogonom. U prvom dijelu provedena je analiza tržišta i razrađeni su koncepti. Odabran je optimalni koncept s kojim se išlo u daljnju razradu, proračun kritičnih dijelova te izradu 3D CAD modela. Naposljetku je izrađena tehnička dokumentacija. 3D model i sva tehnička dokumentacija izrađena je u programskom paketu Solidworks 2020.
Abstract (english)
The topic of this undergraduate thesis is conceptualization and design of a console crane which is used for maintenance of steel structures and devices with very high loading capacity. The crane must be able to be disassembled, assembled, and transported manually, and it must be possible to connect the crane on pre-prepared flanges on the structure on which the work is being performed. In order to allow assembly, disassembly and transport, each subsystem of the crane must not weigh more than 50 kg. The crane consists of a chain winch and an electric motor, the change of reach and rotation is achieved by manual drive. In the first part of the thesis, market analysis was carried out and the concepts were developed. An optimal concept was chosen, which was used for further development, the calculation of critical parts and the creation of a 3D CAD model. Finally, the technical documentation was created. The 3D model and all technical documentation was created in the Solidworks 2020 software package.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:739015
Study programmeTitle: Mechanical Engineering; specializations in: Design, Process and Energy Engineering, Production Engineering, Engineering Modelling and Computer Simulation, Marine Engineering, Industrial Engineering and Management, Materials Engineering
Course: Design
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-02-22 16:12:19