prikaz prve stranice dokumenta Simulacija lijevanja kartera dizel motora od aluminijeve legure u pješčani kalup
  Download
PDF 3.76 MB
undergraduate thesis
Simulacija lijevanja kartera dizel motora od aluminijeve legure u pješčani kalup
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:987251
Obrovac, Matea
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Obrovac, M. (2023). Simulacija lijevanja kartera dizel motora od aluminijeve legure u pješčani kalup (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:987251

Obrovac, Matea. "Simulacija lijevanja kartera dizel motora od aluminijeve legure u pješčani kalup." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:987251

Obrovac, Matea. "Simulacija lijevanja kartera dizel motora od aluminijeve legure u pješčani kalup." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:987251

Obrovac, M. (2023). 'Simulacija lijevanja kartera dizel motora od aluminijeve legure u pješčani kalup', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 21 December 2024, https://urn.nsk.hr/urn:nbn:hr:235:987251

Obrovac M. Simulacija lijevanja kartera dizel motora od aluminijeve legure u pješčani kalup [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2024 December 21] Available at: https://urn.nsk.hr/urn:nbn:hr:235:987251

M. Obrovac, "Simulacija lijevanja kartera dizel motora od aluminijeve legure u pješčani kalup", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:987251

Metadata
TitleSimulacija lijevanja kartera dizel motora od aluminijeve legure u pješčani kalup
Title (english)Sand casting simulation of aluminium alloy diesel engine sump
AuthorMatea Obrovac
MentorBranko Bauer (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2023-03-02, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu obrađene su osnove tehnologije lijevanja aluminijevih legura s naglaskom na dijelove uljevnog sustava i njegovu konstrukciju. Objašnjena su svojstva najčešće korištenih aluminijevih legura u ljevarstvu te su obrađeni primjeri najčešćih grešaka koje se javljaju pri lijevanju. U eksperimentalnom dijelu rada opisan je proračun uljevnog sustava za lijevanje kartera dizel motora od aluminijeve legure AlSi12 te je napravljen 3D model odljevka i njegovog uljevnog sustava. Koristeći 3D model, provedena je simulacija lijevanja u programu ProCAST sa svrhom otkrivanja potencijalnih grešaka. Nakon dobivenih rezultata simulacije, dan je prijedlog poboljšanja uljevnog sustava kako bi se postojeće greške uklonile ili minimizirale.
Abstract (english)
This thesis covers the basics of aluminium alloy casting technology, with an emphasis on the components of the gating system and its design. The properties of the most commonly used aluminium alloys in casting were explained, and examples of the most frequent defects that occur during casting were addressed. In the experimental section of the thesis, the calculation of the gating system for casting an AlSi12 alloy diesel engine sump was described, and a 3D model of the casting and its gating system was created. Using the 3D model, a casting simulation was performed in the ProCAST software to detect potential defects. Based on the simulation results, suggestions were made to improve the gating system to eliminate or minimize existing defects.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:987251
Study programmeTitle: Mechanical Engineering; specializations in: Design, Process and Energy Engineering, Production Engineering, Engineering Modelling and Computer Simulation, Marine Engineering, Industrial Engineering and Management, Materials Engineering
Course: Production Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-02-27 22:22:49