prikaz prve stranice dokumenta Analiza tolerancija i procjena sposobnosti procesa jedinice za distribuciju električne energije
Embargo period 2025-05-04
master's thesis
Analiza tolerancija i procjena sposobnosti procesa jedinice za distribuciju električne energije
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:118257
Fišić, Lovro
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Fišić, L. (2023). Analiza tolerancija i procjena sposobnosti procesa jedinice za distribuciju električne energije (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:118257

Fišić, Lovro. "Analiza tolerancija i procjena sposobnosti procesa jedinice za distribuciju električne energije." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:118257

Fišić, Lovro. "Analiza tolerancija i procjena sposobnosti procesa jedinice za distribuciju električne energije." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:118257

Fišić, L. (2023). 'Analiza tolerancija i procjena sposobnosti procesa jedinice za distribuciju električne energije', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 06 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:118257

Fišić L. Analiza tolerancija i procjena sposobnosti procesa jedinice za distribuciju električne energije [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2024 November 06] Available at: https://urn.nsk.hr/urn:nbn:hr:235:118257

L. Fišić, "Analiza tolerancija i procjena sposobnosti procesa jedinice za distribuciju električne energije", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:118257

Metadata
TitleAnaliza tolerancija i procjena sposobnosti procesa jedinice za distribuciju električne energije
Title (english)Tolerance analysis and process capability assessment of power distribution unit
AuthorLovro Fišić
MentorBiserka Runje (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2023-05-10, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
Procjena sposobnosti procesa bitan je dio u razvoju proizvoda koji daje uvid u moguće nesukladnosti kod procesa sklapanja. Nakon izrade dizajna proizvoda i definiranja tehničke dokumentacije pristupa se postupku analize tolerancija te zatim s rezultatima analize pristupa se procjeni sposobnosti procesa sklapanja. Za izradu analize tolerancija kod složenih sklopova s velikim brojem komponenti, danas se koriste razni programski paketi koji se nazivaju računalom potpomognuta analiza tolerancija (Computer Aided Tolerancing - CAT). U prvom dijelu ovog rada opisan je analizirani proizvod, tj. jedinica za distribuciju električne energije, njezina funkcija, pregled komponenti. Također izneseno je što je postupak analize tolerancija i procjena sposobnosti procesa, Šest sigma metodologija. Opisan je korišteni CAT programski paket i Monte Carlo metoda prema kojoj radi. U drugom dijelu je gore navedeni postupak analize tolerancija primijenjen na primjere iz proizvoda pomoću CAT programskog paketa 3DCS te su izneseni i komentirani rezultati procjene sposobnosti procesa.
Abstract (english)
Process capability assessment is an essential part of product development that gives us insight into possible non-conformities in the assembly process. After creating the product design and defining the technical documentation, the tolerance analysis procedure is started, and then, with the results of the analysis, we start assessing the capability of the assembly process. Various software packages called CAT (Computer Aided Tolerancing) are used today to perform tolerance analysis of complex assemblies with a large number of components. In the first part of this thesis, the analyzed product is described, i.e. the electricity distribution unit, its function, component overview. It was also presented what the procedure of tolerance analysis and process capability assessment is, as well as the Six Sigma methodology. The CAT softwear used and the Monte Carlo method according to which it works are described. In the second part, the above-mentioned tolerance analysis procedure was applied to an example from a product using the CAT software package 3DCS, and the results of the process capability assessment were presented and commented on.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:118257
Study programmeTitle: Mechanical Engineering; specializations in: Design, Process and Energy Engineering, Production Engineering, Engineering Modelling and Computer Simulation, Marine Engineering, Industrial Engineering and Management, Materials Engineering, Mechatronics and Robotics, Autonomous Systems
Course: Design
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsEmbargoed access
Embargo expiration date: 2025-05-04
Terms of useLicence In copyright icon
Created on2023-05-04 18:26:40