prikaz prve stranice dokumenta Oblikovanje procesa proizvodnje korištenjem principa Vitkog menadžmenta
Embargo period 2028-05-11
master's thesis
Oblikovanje procesa proizvodnje korištenjem principa Vitkog menadžmenta
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:678651
Šimić, Josip
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Šimić, J. (2023). Oblikovanje procesa proizvodnje korištenjem principa Vitkog menadžmenta (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:678651

Šimić, Josip. "Oblikovanje procesa proizvodnje korištenjem principa Vitkog menadžmenta." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:678651

Šimić, Josip. "Oblikovanje procesa proizvodnje korištenjem principa Vitkog menadžmenta." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:678651

Šimić, J. (2023). 'Oblikovanje procesa proizvodnje korištenjem principa Vitkog menadžmenta', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 22 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:678651

Šimić J. Oblikovanje procesa proizvodnje korištenjem principa Vitkog menadžmenta [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2024 November 22] Available at: https://urn.nsk.hr/urn:nbn:hr:235:678651

J. Šimić, "Oblikovanje procesa proizvodnje korištenjem principa Vitkog menadžmenta", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:678651

Metadata
TitleOblikovanje procesa proizvodnje korištenjem principa Vitkog menadžmenta
Title (english)Designing the production process using the principles of Lean management
AuthorJosip Šimić
MentorNedeljko Štefanić (mentor)
Committee memberBožidar Matijević (član povjerenstva)
Committee memberMihael Cipek (član povjerenstva)
Committee memberDragutin Lisjak (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2023-05-11, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U sklopu rada sam predstavio povijesti otkako se proizveo prvi električni automobil i koje su njegove primjene. Nakon čega sam analizirao koje su se sve promjene dogodile od tada do danas kako bi koncept električnog automobila relativno zaživio. Rad je koncipiran na principu da razvoj predaje koncept proizvoda kojeg je potrebno proizvesti u određenim količinama i vremenskom intervalu, odnosno industrijalizirati proizvod, koji će pretrpjeti određene promjene u dizajnu kako bi se način njegove proizvodnje pojednostavio i investicijski što više rasteretio. Tako se na proizvodu metodama Lean menadžmenta napravila analiza u kojoj su utvrđeni nedostatci koji bi zahtijevali dodatne napore i investicije da se proizvod proizvede, s toga se napravilo nekoliko promjena u dizajnu koje su omogućile jednostavniji način proizvodnje od prethodnog. Posljedica utvrđenih nedostataka je nemogućnost proizvodnje i veliki investicijski troškovi. Na osnovu teorijske podloge Lean menadžmenta i njegovih koncepata proizvodnje, izabrao sam nekoliko alata i principa koji su se pokazali kao vrlo učinkoviti u postavljanju novog koncepta proizvodnje i njegovom primjenom u automobilskoj industriji.
Abstract (english)
As part of this master thesis, I presented the history since the first electric car was produced and what its applications are. After which I analyzed all the changes that took place between then and now for the electric car concept to come to life relatively. This master thesis is conceived on the principle that development presents the concept of a product that needs to be produced in certain quantities and time interval, that is, to industrialize the product, which will undergo certain changes in design in order to simplify the way of its production and reduce the investment burden as much as possible. An analysis was made on the product using the DFMA method, in which defects were identified that would require additional efforts and investments to produce the product, and several changes were made in the design that enabled a simpler way of production than the previous one. The consequence of the identified deficiencies is the impossibility of production and high investment costs. Based on the theoretical basis of Lean management and its production concepts, I have chosen several tools and principles that have proven to be very effective in setting up a new production concept and its application in the automotive industry.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:678651
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsEmbargoed access
Embargo expiration date: 2028-05-11
Terms of useLicence In copyright icon
Created on2023-05-09 15:55:38