prikaz prve stranice dokumenta Numerical analysis of adhesively bonded joints
  Download
PDF 2.58 MB
master's thesis
Numerical analysis of adhesively bonded joints
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:700861
Milohanić, Darian
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Milohanić, D. (2023). Numerical analysis of adhesively bonded joints (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:700861

Milohanić, Darian. "Numerical analysis of adhesively bonded joints." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:700861

Milohanić, Darian. "Numerical analysis of adhesively bonded joints." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:700861

Milohanić, D. (2023). 'Numerical analysis of adhesively bonded joints', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 01 January 2025, https://urn.nsk.hr/urn:nbn:hr:235:700861

Milohanić D. Numerical analysis of adhesively bonded joints [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2025 January 01] Available at: https://urn.nsk.hr/urn:nbn:hr:235:700861

D. Milohanić, "Numerical analysis of adhesively bonded joints", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:700861

Metadata
TitleNumerical analysis of adhesively bonded joints
Title (croatian)Numeričko modeliranje lijepljenih spojeva
AuthorDarian Milohanić
MentorLana Virag (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2023-07-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
The usage of structural adhesives has increasingly been used in the automotive industry. At the same time the knowledge and the experience about structural adhesive modelling and failure predictions in the field of numerical analysis is limited. In order to reduce these shortcomings, this thesis aims to find a solution to model adhesive behaviour in a full vehicle simulation. Thus, in this thesis, first of all, a literature review was performed. Based on this review, a description of adhesives and most relevant terms is presented. Two modelling methods – continuum mechanics and cohesive zone model – have been chosen for a further analysis and comparison. Detailed description of their formulation is presented. Next, a stiffness comparison of the models was performed on a single lap joint, after which a stress distribution of the models is analysed and compared. Also, numerical results are compared to test data extracted from literature to verify their accuracy. Lastly, sensitivity study was performed by varying following parameters: element size, adherend thickness, bondline thickness and bondline length.
Abstract (croatian)
Upotreba lijepljenih spojeva u automobilskoj industriji se sve više povećava. U isto vrijeme znanje i iskustvo o numeričkom modeliranju i analizi lijepljenih spojeva je ograničeno. Iz tog razloga, cilj ovog rada je pronaći način analiziranja lijepljenih spojeva koji će u sklopu simulacije cijelog vozila biti jednostavni, a pouzdano točni. Unutar ovog rada je u sklopu pregleda literature dan je opis problematike lijepljenih spojeva sa najvažnijim terminima. Temeljem pregleda literature su odabrane dvije metode analiziranja lijepljenih spojeva za detaljnu razradu i usporedbu rezultata – model temeljen na mehanici kontinuuma i model kohezivne zone (eng. cohesive zone model). Za oba modela su njihove formulacije detaljno opisane. Nadalje, na primjeru jednostruko preklopnog spoja odrađena je usporedba odabranih metoda u smislu krutosti numeričkih modela i dobivenih raspodjela naprezanja. Numerički dobiveni rezultati su također uspoređeni s eksperimentalnim podacima iz literature, kako bi se odredila njihova točnost. Na kraju je izvršena analiza senzitivnosti variranjem sljedećih parametara: veličina konačnih elemenata, debljina supstrata, debljina ljepila i dužina lijepljenog spoja.
Keywords
Keywords (croatian)
Languageenglish
URN:NBNurn:nbn:hr:235:700861
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) icon
Created on2023-07-07 07:52:42