prikaz prve stranice dokumenta Razvoj i 3D ispis jezgre pješčanog kalupa za izradu naprave za pozicioniranje nosača motora vozila
  Download
PDF 8.46 MB
master's thesis
Razvoj i 3D ispis jezgre pješčanog kalupa za izradu naprave za pozicioniranje nosača motora vozila
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:403792
Jerman, Elvin
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Jerman, E. (2023). Razvoj i 3D ispis jezgre pješčanog kalupa za izradu naprave za pozicioniranje nosača motora vozila (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:403792

Jerman, Elvin. "Razvoj i 3D ispis jezgre pješčanog kalupa za izradu naprave za pozicioniranje nosača motora vozila." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:403792

Jerman, Elvin. "Razvoj i 3D ispis jezgre pješčanog kalupa za izradu naprave za pozicioniranje nosača motora vozila." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:403792

Jerman, E. (2023). 'Razvoj i 3D ispis jezgre pješčanog kalupa za izradu naprave za pozicioniranje nosača motora vozila', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 17 August 2024, https://urn.nsk.hr/urn:nbn:hr:235:403792

Jerman E. Razvoj i 3D ispis jezgre pješčanog kalupa za izradu naprave za pozicioniranje nosača motora vozila [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2024 August 17] Available at: https://urn.nsk.hr/urn:nbn:hr:235:403792

E. Jerman, "Razvoj i 3D ispis jezgre pješčanog kalupa za izradu naprave za pozicioniranje nosača motora vozila", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:403792

Metadata
TitleRazvoj i 3D ispis jezgre pješčanog kalupa za izradu naprave za pozicioniranje nosača motora vozila
Title (english)Development and 3D print of the sand mould core for production of fixture for vehicle motor carrier positioning
AuthorElvin Jerman
MentorDamir Godec (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2023-07-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Integracijom aditivne proizvodnje i lijevanja u pješčani kalup, u ovom radu, prikazan je postupak razvoja i 3D ispisa jezgre pješčanog kalupa za izradu naprave za pozicioniranje nosača motora vozila. Proces započinje definiranjem funkcije i zahtjeva naprave za pozicioniranje. Definiranim zahtjevima i funkcijom, započinje razvoj CAD modela naprave. Završetkom razvoja CAD modela, izabrani su željeni parametri ispisa FDM tehnologijom te se ispisala jezgra pješčanog kalupa. 3D skenerom skenirao se ispisani model, kojeg se usporedilo s dimenzijama referentnog CAD modela. Ispisani model naprave, upotrijebljen je kao jezgra pješčanog kalupa, za izradu kalupne šupljine, u koju se naposljetku izlijeva aluminijeva legura AlSi8Cu3.
Abstract (english)
Through integration of additive manufacturing and sand casting, this paper presents the process of development and 3D printing of a sand casting core for manufacture of the positioning device for vehicle engine mount. The process begins by defining the function and requirements of the positioning device. With defined requirements and function, development of the CAD model begins. After the CAD model completion, desired printing parameters are selected, by using fused deposition modeling (FDM) technology, the casting core is printed. The printed model is scanned with a 3D scanner, and then compared with dimensions of the CAD model. The printed model of the device is used as the casting core, to create a mold cavity, in which the aluminum alloy (AlSi8Cu3) is ultimately poured into.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:403792
Study programmeTitle: Mechanical Engineering; specializations in: Design, Process and Energy Engineering, Production Engineering, Engineering Modelling and Computer Simulation, Marine Engineering, Industrial Engineering and Management, Materials Engineering, Mechatronics and Robotics, Autonomous Systems
Course: Autonomous Systems
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-07-07 12:10:26