prikaz prve stranice dokumenta Utjecaj parametara elektropoliranja na stanje površine titanija
  Download
PDF 6.09 MB
master's thesis
Utjecaj parametara elektropoliranja na stanje površine titanija
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:520101
Šambula, Sara
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Šambula, S. (2023). Utjecaj parametara elektropoliranja na stanje površine titanija (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:520101

Šambula, Sara. "Utjecaj parametara elektropoliranja na stanje površine titanija." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:520101

Šambula, Sara. "Utjecaj parametara elektropoliranja na stanje površine titanija." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:520101

Šambula, S. (2023). 'Utjecaj parametara elektropoliranja na stanje površine titanija', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 06 May 2024, https://urn.nsk.hr/urn:nbn:hr:235:520101

Šambula S. Utjecaj parametara elektropoliranja na stanje površine titanija [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2024 May 06] Available at: https://urn.nsk.hr/urn:nbn:hr:235:520101

S. Šambula, "Utjecaj parametara elektropoliranja na stanje površine titanija", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:520101

Metadata
TitleUtjecaj parametara elektropoliranja na stanje površine titanija
Title (english)Influence of electropolishing parameters on the titanium surface
AuthorSara Šambula
MentorZdravko Schauperl (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2023-07-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu analiziran je utjecaj parametara postupka elektrolitičkog-plazma poliranja na stanje površine ispitnih uzorka izrađenih od titanijeve legure, koja se koristi za proizvodnju dentalnih protetskih nadomjestaka. U teorijskom dijelu rada, nakon uvoda, obuhvaćen je povijesni pregled dentalnih protetskih nadomjestaka. Također, detaljno su opisane različite vrste dentalnih protetskih nadomjestaka, istaknuti su zahtjevi vezani uz njihova svojstva, pružen je pregled postupaka obrade njihovih površina te su navedene vrste metalnih materijala koji se koriste u izradi dentalne protetike. U eksperimentalnom dijelu rada, najprije je opisan proces izrade ispitnih uzoraka koji su potom podvrgnuti postupku elektrolitičkog-plazma poliranja uz primjenu različitih parametara postupka. Nakon provedbe postupka, na ispitnim uzorcima izmjerene su vrijednosti parametra hrapavosti površine Ra, a površine uzoraka analizirane su pomoću digitalnog mikroskopa.
Abstract (english)
This paper examines the influence of various parameters of plasma electrolytic polishing on the surface properties of titanium alloy used in manufacure of dental prostheses. In the theoretical part of the paper, a historical overview of dental prostheses is given after the introduction. Also, described in detail are different types of dental prostheses, their property requirements, as well as the types of surface treatment and metal materials used in their manufacture. In the experimental part of the paper, the process of manufacturing test specimens is first described. The test specimens were then subjected to plasma electrolytic polishing using various parameters of the process. Lastly, the values of the surface roughness parameter Ra were measured on the test specimens and their surfaces were analysed using a digital microscope.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:520101
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-07-11 16:56:35