prikaz prve stranice dokumenta Uspostavljanje pokretne proizvodne linije za automatsku inspekciju proizvoda uz primjenu programiranja s malo ili bez koda
  Download
PDF 4.6 MB
master's thesis
Uspostavljanje pokretne proizvodne linije za automatsku inspekciju proizvoda uz primjenu programiranja s malo ili bez koda
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:395838
Meštrović, Lovro
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Meštrović, L. (2023). Uspostavljanje pokretne proizvodne linije za automatsku inspekciju proizvoda uz primjenu programiranja s malo ili bez koda (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:395838

Meštrović, Lovro. "Uspostavljanje pokretne proizvodne linije za automatsku inspekciju proizvoda uz primjenu programiranja s malo ili bez koda." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:395838

Meštrović, Lovro. "Uspostavljanje pokretne proizvodne linije za automatsku inspekciju proizvoda uz primjenu programiranja s malo ili bez koda." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:395838

Meštrović, L. (2023). 'Uspostavljanje pokretne proizvodne linije za automatsku inspekciju proizvoda uz primjenu programiranja s malo ili bez koda', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 20 May 2024, https://urn.nsk.hr/urn:nbn:hr:235:395838

Meštrović L. Uspostavljanje pokretne proizvodne linije za automatsku inspekciju proizvoda uz primjenu programiranja s malo ili bez koda [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2024 May 20] Available at: https://urn.nsk.hr/urn:nbn:hr:235:395838

L. Meštrović, "Uspostavljanje pokretne proizvodne linije za automatsku inspekciju proizvoda uz primjenu programiranja s malo ili bez koda", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:395838

Metadata
TitleUspostavljanje pokretne proizvodne linije za automatsku inspekciju proizvoda uz primjenu programiranja s malo ili bez koda
Title (english)Establishing a moving production line for automated product inspection using low or no code programming
AuthorLovro Meštrović
MentorMiro Hegedić (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2023-07-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U diplomskom radu je razrađena tema pokretne trake, njezina povijest i suvremene primjene u industriji. Uvod opisuje razvoj pokretne trake od prošlih vremena do danas. Fokus prvog dijela rada je na automatizaciji pokretne trake korištenjem senzora, releja, PLC-a te računalnih sustava. U drugom dijelu opisane su različite metode automatizacije, uključujući programiranje s malo ili bez koda. Navedeni su alati i platforme koji omogućavaju automatizaciju bez dubljeg poznavanja programiranja. Nadalje, opisani su pristupi upravljanja i aplikacije za praćenje proizvodnje koje bi se mogle koristiti u kombinaciji s pokretnom trakom. Lean pristup upravljanja uključuje različite tehnike poput 5S, TPM, SMED, itd. Također, predstavljene su razne aplikacije za praćenje proizvodnje. U četvrtom dijelu nalazi se opis koncepta rada proizvodne linije i njezini sastavni elementi. Dok se u petom dijelu razmatra primjena pristupa upravljanja i aplikacija na pokretnoj traci. Naglasak je na potencijalnim poboljšanjima linije, prikupljanju i analizi podataka te usporedbi procesa s manufakturom. Zaključak sažeto iznosi glavne spoznaje istraživanja o pokretnoj traci, njezinoj automatizaciji te pristupima upravljanja i aplikacijama koje se mogu koristiti za poboljšanje proizvodnih procesa.
Abstract (english)
The thesis elaborates on the topic of production line, their history, and contemporary applications in the industry. The introduction describes the development of production line from the past to the present day. The focus of the first part of the paper is on the automation of production line using sensors, relays, PLCs, and computer systems. In the second part, various methods of automation are described, including low-code and no-code programming. The tools and platforms that enable automation without a deep knowledge of programming are mentioned. Furthermore, management approaches and production monitoring applications that could be used in combination with the production line are described. The Lean management approach includes various techniques such as 5S, TPM, SMED, etc. Various production monitoring applications are also presented. The fourth part contains a description of the concept of the production line and its constituent elements. The fifth part discusses the implementation of management approaches and applications on the production line. The emphasis is on potential line improvements, data collection and analysis, and process comparison with manufacturing. The conclusion presents the main findings of the research on the production line, its automation, and management approaches and applications that can be used to enhance production processes.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:395838
Study programmeTitle: Mechanical Engineering; specializations in: Design, Process and Energy Engineering, Production Engineering, Engineering Modelling and Computer Simulation, Marine Engineering, Industrial Engineering and Management, Materials Engineering, Mechatronics and Robotics, Autonomous Systems
Course: Industrial Engineering and Management
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-07-17 11:03:06