prikaz prve stranice dokumenta Trošenje spiralnih svrdla prevučenih prevlakom TiN pri bušenju aluminijeve metalne pjene
  Download
PDF 3.06 MB
master's thesis
Trošenje spiralnih svrdla prevučenih prevlakom TiN pri bušenju aluminijeve metalne pjene
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:763976
Drakšić, Silvio
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Drakšić, S. (2023). Trošenje spiralnih svrdla prevučenih prevlakom TiN pri bušenju aluminijeve metalne pjene (Master's thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:763976

Drakšić, Silvio. "Trošenje spiralnih svrdla prevučenih prevlakom TiN pri bušenju aluminijeve metalne pjene." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:763976

Drakšić, Silvio. "Trošenje spiralnih svrdla prevučenih prevlakom TiN pri bušenju aluminijeve metalne pjene." Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:763976

Drakšić, S. (2023). 'Trošenje spiralnih svrdla prevučenih prevlakom TiN pri bušenju aluminijeve metalne pjene', Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 14 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:763976

Drakšić S. Trošenje spiralnih svrdla prevučenih prevlakom TiN pri bušenju aluminijeve metalne pjene [Master's thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2024 November 14] Available at: https://urn.nsk.hr/urn:nbn:hr:235:763976

S. Drakšić, "Trošenje spiralnih svrdla prevučenih prevlakom TiN pri bušenju aluminijeve metalne pjene", Master's thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:763976

Metadata
TitleTrošenje spiralnih svrdla prevučenih prevlakom TiN pri bušenju aluminijeve metalne pjene
Title (english)Wear of spiral drills coated with TiN coating when drilling aluminium metal foam
AuthorSilvio Drakšić
MentorDarko Landek (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2023-07-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U radu je provedeno ispitivanje otpornosti na trošenje komercijalno dobavljivog neprevučenog svrdla od brzoreznog čelika, u usporedi sa svrdlima prevučenim PVD TiN prevlakom, nitriranom površinom u plazmi te dvaju svrdla prevučenih PACVD prevlakama pri suhom bušenju aluminijeve pjene. Prevlačenje PACVD provedeno je prevlakama TiN/TiCN i TiN. Ispitivanje trošenja svrdla provedeno je bušenjem provrta u dva uzorka od aluminijeve pjene i jednom uzorku punog presjeka od legure 6082 T6. Uz konstantnu brzinu vrtnje svrdla, mjerena je temperatura, sila, posmak i dubina provrta. Svrdla su nakon bušenja analizirana svjetlosnim mikroskopom. Svrdlo prevučeno PACVD TiN/TiCN prevlakom izbušilo je najveći volumen provrta, a nešto manji izbušilo je svrdlo prevučeno PACVD TiN prevlakom na sva tri uzorka. Neprevučeno svrdlo izbušilo je najmanji volumen provrta uz veće zagrijavanje od ostalih svrdla kod bušenja aluminijeve legure punog presjeka.
Abstract (english)
In this study, an investigation of wear resistance was conducted on a commercially available uncoated high-speed steel drill bit, compared to drill bits coated with PVD TiN coating, plasma-nitrided surface, and two drill bits coated with PACVD coatings during dry drilling of aluminum foam. PACVD coating was performed with TiN/TiCN and TiN coatings. The drill wear test was conducted by drilling holes in two samples of aluminum foam and one sample of solid cross-section of 6082 T6 alloy. While maintaining a constant drill rotation speed, temperature, force, feed rate, and drilling depth were measured. The drilled drill bits were analyzed using a light microscope. The PACVD TiN/TiCN coated drill bit produced the largest hole volume, while slightly smaller hole volumes were obtained with the PACVD TiN-coated drill bit on all three samples. The uncoated drill bit drilled the smallest hole volume and experienced higher heating compared to the other drill bits when drilling the solid cross-section of the aluminum alloy.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:763976
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 3.0 Unported (CC BY 3.0) icon
Created on2023-07-18 13:45:45