prikaz prve stranice dokumenta Toplinska obrada MARAGING čelika dobivenog selektivnim laserskim taljenjem
  Download
PDF 1.67 MB
undergraduate thesis
Toplinska obrada MARAGING čelika dobivenog selektivnim laserskim taljenjem
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:162525
Marinović, Gabrijel
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Marinović, G. (2023). Toplinska obrada MARAGING čelika dobivenog selektivnim laserskim taljenjem (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:162525

Marinović, Gabrijel. "Toplinska obrada MARAGING čelika dobivenog selektivnim laserskim taljenjem." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:162525

Marinović, Gabrijel. "Toplinska obrada MARAGING čelika dobivenog selektivnim laserskim taljenjem." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:162525

Marinović, G. (2023). 'Toplinska obrada MARAGING čelika dobivenog selektivnim laserskim taljenjem', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 11 August 2024, https://urn.nsk.hr/urn:nbn:hr:235:162525

Marinović G. Toplinska obrada MARAGING čelika dobivenog selektivnim laserskim taljenjem [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2024 August 11] Available at: https://urn.nsk.hr/urn:nbn:hr:235:162525

G. Marinović, "Toplinska obrada MARAGING čelika dobivenog selektivnim laserskim taljenjem", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:162525

Metadata
TitleToplinska obrada MARAGING čelika dobivenog selektivnim laserskim taljenjem
Title (english)Heat treatment of MARAGING steel obtained by selective laser melting
AuthorGabrijel Marinović
MentorŽeljko Alar (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2023-09-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tehnologije aditivne proizvodnje sve više se koriste za male serije proizvodnje, izradu specijalnih komponenti i prototipova. Omogućuju izravnu proizvodnju dijelova složenih geometrija i najčešće nije potrebna naknadna obrada. U ovom radu opisan je postupak aditivne proizvodnje selektivnim laserskim taljenjem (SLM), materijali koji se mogu obrađivati tim postupkom i primjene gotovih komponenti. Uzorci su izrađeni od MARAGING čelika SLM postupkom, ispitana je tvrdoća u isporučenom stanju, provedena je toplinska obrada te je ponovno ispitana tvrdoća toplinski obrađenih uzoraka. Na temelju dobivenih rezultata provedena je analiza i napisan zaključak.
Abstract (english)
Additive manufacturing technologies are increasingly used for small series production, production of special components and prototypes. They enable direct production of parts with complex geometries and in most cases, post-processing is not required. This paper describes the process of additive manufacturing by selective laser melting (SLM), the materials that can be processed by SLM, and the applications of the finished components. Samples of MARAGING steel were made by SLM process, hardness was tested in the "as-built" state, heat treatment was carried out, and hardness of the heat-treated samples was tested again. Based on the obtained results, an analysis was carried out and a conclusion was written.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:162525
Study programmeTitle: Mechanical Engineering; specializations in: Design, Process and Energy Engineering, Production Engineering, Engineering Modelling and Computer Simulation, Marine Engineering, Industrial Engineering and Management, Materials Engineering
Course: Materials Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2023-09-21 11:25:13