prikaz prve stranice dokumenta Digitalizacija zrakoplovnog instrumenta za ugradnju u simulator za obuku pilota jedrilice
  Download
PDF 2.91 MB
undergraduate thesis
Digitalizacija zrakoplovnog instrumenta za ugradnju u simulator za obuku pilota jedrilice
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. urn:nbn:hr:235:798851
Delija, Viktoria
University of Zagreb
Faculty of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of Faculty of Mechanical Engineering and Naval Architecture University of Zagreb

Cite this document

Delija, V. (2023). Digitalizacija zrakoplovnog instrumenta za ugradnju u simulator za obuku pilota jedrilice (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:235:798851

Delija, Viktoria. "Digitalizacija zrakoplovnog instrumenta za ugradnju u simulator za obuku pilota jedrilice." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:798851

Delija, Viktoria. "Digitalizacija zrakoplovnog instrumenta za ugradnju u simulator za obuku pilota jedrilice." Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, 2023. https://urn.nsk.hr/urn:nbn:hr:235:798851

Delija, V. (2023). 'Digitalizacija zrakoplovnog instrumenta za ugradnju u simulator za obuku pilota jedrilice', Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, accessed 22 November 2024, https://urn.nsk.hr/urn:nbn:hr:235:798851

Delija V. Digitalizacija zrakoplovnog instrumenta za ugradnju u simulator za obuku pilota jedrilice [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture; 2023 [cited 2024 November 22] Available at: https://urn.nsk.hr/urn:nbn:hr:235:798851

V. Delija, "Digitalizacija zrakoplovnog instrumenta za ugradnju u simulator za obuku pilota jedrilice", Undergraduate thesis, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:235:798851

Metadata
TitleDigitalizacija zrakoplovnog instrumenta za ugradnju u simulator za obuku pilota jedrilice
Title (english)Digitalization of aircraft instrument for application in glider pilot training simulator
AuthorViktoria Delija
MentorMladen Crneković (mentor)
GranterUniversity of Zagreb
Faculty of Mechanical Engineering and Naval Architecture
Zagreb
Defense date and country2023-09-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovaj rad se može podijeliti u tri dijela: prvi je prilagodba samih instrumenata kako bi se mogli ugraditi motori za upravljanje kazaljkom te konstruiranje i izrada svih potrebnih dijelova za ispravan rad. Drugi dio je odabir upravljačke pločice i svih potrebnih dijelova koji su prilagođeni za svaki instrument te izrada ispravne električke sheme koja ima sve potrebne komponente. Treći dio je prijenos informacija iz simulatora na upravljaču pločicu putem Bluetooth komunikacije i sam način slanja i obrade potrebnih podataka za prikazivanje ispravnih vrijednosti na instrumentima, kao i programiranje upravljačke pločice. U radu su korišteni programi Altium Designer i SolidWorks, kao i programsko sučelje Arduino.
Abstract (english)
This thesis can be divided into three parts: the first part involves adapting the instruments themselves to accommodate the installation of motors for controlling the gauge and designing all the necessary components for proper operation. The second part is the selection of the microcontroller board and all the necessary parts for each instrument, as well as the creation of a correct electrical scheme that includes all the required components. The third part is the transfer of information from the simulator to the microcontroller board via Bluetooth communication and the method of sending and processing the necessary data to display correct values on the instruments, as well as programming the microcontroller board. The programs used in this work include Altium Designer and SolidWorks, as well as the Arduino software interface.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:235:798851
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2023-09-21 12:05:24